2016 Maserati Ghibli 3.0L Diesel · A15 XAH

A consistent record of clean MOT certificates since 2022 defines this vehicle's recent roadworthiness, following a period in 2021 where wear-related advisories were noted. The most recent test on 28 November 2025 resulted in a pass with no defects recorded, suggesting that the previous issues regarding tyre tread and brake pad thickness were addressed. This trend indicates that the mechanical components subject to inspection have been maintained within legal parameters over the last four testing cycles, moving from a state of flagged wear to a clean status. The recorded mileage of 96,484 miles over approximately ten years represents an average annual accumulation of roughly 9,648 miles. This usage pattern is consistent with typical long-distance or mixed-use driving for a vehicle of this age rather than high-intensity or heavy-duty application. Mechanically, this level of mileage suggests that while the vehicle is not a low-mileage example, it has not been subjected to the accelerated wear on suspension bushings, drivetrain components, and braking systems often seen in much higher-mileage vehicles. Prospective buyers should focus their physical inspection on the areas previously flagged in the 2021 advisory to ensure no recurring issues exist. Although the 2025 record is clear, the earlier mention of nearside and offside front tyres being worn on the edges can sometimes indicate underlying suspension geometry issues. During a test drive, pay close attention to the steering response and look for any pulling to one side on straight roads, which could suggest uneven tyre wear caused by misaligned camber or toe settings. Regarding the braking system, the previous advisory for thin rear brake pads necessitates a thorough check of the current pad thickness and disc condition. While the recent pass indicates the pads are currently within limits, you should listen for any high-pitched squealing or grinding noises during low-speed braking and feel for any pedal judder or pulsation, which could indicate warped discs or binding calipers. Ensuring the braking performance is smooth and consistent will confirm that the previous wear issues have been fully rectified.