2020 Scania 450S 12.7L Heavy oil · AE70 EWW

The Scania 450S holds a clean roadworthiness status. The most recent test on 10 September 2025 at 463,873 miles passed with no defects recorded, and the maintenance trend across all four MOT entries is stable with zero advisories or failures. Previous operators kept the vehicle to a fault-free standard through every annual examination. Mileage accumulation on this 2020 unit runs high for its age. The records show 97,239 miles at the 11 November 2021 test, jumping to 186,589 miles by 9 November 2022, then 219,299 miles on 23 August 2024, and finally 463,873 miles at the September 2025 test. The leap of over 244,000 miles in just thirteen months points to intensive commercial haulage use, averaging roughly 77,312 miles per year overall. The sparse four-entry history with no gaps longer than roughly twenty-one months gives limited visibility but shows no lapsed testing. A buyer should still commission a physical inspection of heavy-wear items given the mileage. At 463,873 miles the suspension bushes, coil springs, and brake discs will carry substantial fatigue even without tester flags. Drivetrain components including differential and gearbox bearings warrant oil analysis and visual checks for leaks. Structural integrity under the chassis needs close examination for corrosion around crossmembers and outriggers. The clean MOT record implies basic upkeep was not skipped, yet high annual mileage means consumable replacement cycles sit far ahead of a typical leisure vehicle. Pre-purchase scrutiny of tyre tread depth and exhaust emissions hardware remains sound practice.