2018 Yamaha YP 400 RA X-MAX ABS 0.4L Petrol · AP18 ARX

This Yamaha YP400 RA X-Max ABS shows a stable roadworthiness profile, having passed its most recent MOT on 28 September 2021 with no defects recorded. The absence of advisories or repeated failures suggests the vehicle has not undergone significant mechanical issues requiring attention during that period. However, the test date is now nearly five years old , meaning the vehicle has not been subject to a DVSA-approved inspection since. Given the low mileage, this could imply either minimal use or prolonged periods without maintenance, both of which warrant scrutiny. The recorded mileage of 8,530 miles over approximately eight years—roughly 1,066 miles annually —is unusually low for a vehicle of this age. Such limited usage may reduce wear on high-mileage components like suspension bushes or drivetrain seals, but it also raises questions about storage conditions, fuel stability, and battery health. Without intermediate MOTs or service records, there is no evidence of rapid mileage accumulation or aggressive driving patterns, though the lack of recent testing means critical components may have degraded beyond visible inspection. Given the sparse MOT history, a buyer should prioritise an independent inspection of the battery and charging system , given the prolonged inactivity. The tyres —though not flagged in the last test—should be checked for uneven wear or age-related degradation, as they may have been driven on past their recommended service life. The suspension bushes and coil springs , while less likely to fail at this mileage, should be examined for perishing or excessive play, particularly if the vehicle has been stored on uneven surfaces. Finally, the exhaust system and emissions controls —if equipped—should be verified for leaks or corrosion, as these are common failure points in low-mileage but older vehicles. The absence of MOT data beyond 2021 means no recent confirmation of structural integrity or safety-critical systems like brakes and steering, so a thorough mechanical assessment is essential.