2012 Toyota Hilux HL3 D-4D 4X4 DCB 2.5L Diesel · ASZ 3088

The 2012 Toyota Hilux DCB has maintained a consistent MOT pass record across four consecutive tests, with the most recent inspection on 21 September 2025 at 114,578 miles yielding no defects. This suggests the vehicle has undergone regular servicing and has not encountered any major mechanical or structural issues during the test periods. The absence of advisories or repeated failures across these intervals indicates a stable roadworthiness profile, though the lack of defects does not preclude wear beyond MOT thresholds—particularly in areas like suspension bushes, coil springs, and drivetrain components, which are not routinely tested unless visibly failing. The recorded mileage of 114,578 miles over 14 years equates to an average of 8,184 miles per year , a rate typical for a commercial or mixed-use vehicle of this age. The intervals between tests— 14,521 miles (2022–2023) , 14,227 miles (2023–2024) , and 8,501 miles (2024–2025) —show no unusual gaps or rapid accumulation, implying consistent usage without prolonged periods of neglect. The most recent test was conducted just 10 months ago , placing it well within the DVSA’s recommended 12-month interval for this vehicle category, though buyers should confirm the exact service history beyond MOT records. Given the clean MOT history, priority inspection areas should focus on suspension integrity , particularly the rear bushes and coil springs , which are prone to fatigue at this mileage. The front and rear brake calipers and discs warrant close examination for uneven wear or binding, as these are not always flagged until they reach critical thresholds. Structural corrosion—especially around the subframe, sills, and wheel arches —should be assessed, particularly if the vehicle has experienced off-road use or exposure to salted roads. The exhaust system and transfer case seals (in 4x4 models) are also common wear points that may not surface in MOT tests but could lead to emissions failures or drivetrain leaks. A pre-purchase inspection by a qualified mechanic is advised to verify these components.