2014 Ford Transit 2.2L Diesel · AU10 ACE

The 2014 Ford Transit has maintained a clean MOT history with no defects recorded across all five tests, most recently passing on 19 February 2026 at 254,694 miles. This suggests the vehicle has consistently met minimum roadworthiness standards without major recurring issues. The absence of advisories or failings indicates no repeated mechanical or structural concerns, though the lack of defects does not preclude underlying wear that may not have been testable at the time. The most recent test was conducted just five months ago, which is within the standard 12-month MOT cycle for commercial vehicles, though slightly later than the ideal 6-month interval for high-mileage units. No advisories or warnings have appeared in any record, reinforcing the impression of either diligent maintenance or deferred attention to minor issues. The recorded mileage pattern reveals unusually high annual mileage, averaging approximately 21,224 miles per year over the last decade. This is significantly above the typical usage for a commercial van of this age, particularly when comparing the 2023 to 2024 interval, where mileage jumped from 195,772 to 197,131—a 1,361-mile increase in just over a year. The gap between the 2021 and 2023 tests is also notable, with 15,684 miles accumulated in nearly two years, suggesting either intensive commercial use or prolonged periods of inactivity followed by rapid accumulation. Such mileage demands accelerated wear on suspension bushes, coil springs, brake calipers, and drivetrain components, even if the MOT tests have not yet flagged any failures. Given the high mileage and lack of recorded advisories, a buyer should prioritise a thorough inspection of suspension components, particularly the rear axle bushes and coil springs, which are prone to fatigue at this mileage. The brakes, while not failing in tests, may exhibit uneven wear or binding calipers—common in high-mileage vans—so a professional brake inspection is essential. Structural integrity should also be assessed, especially around wheel arches, sills, and the rear cargo area, where corrosion often develops in commercial vehicles. The lack of MOT advisories does not guarantee these areas are sound, so visual and tactile checks for rust penetration and frame distortion are critical. Finally, the exhaust system and emissions components should be examined for leaks or excessive wear, as these are frequently overlooked until they fail a test.