2012 Ford Fiesta 1.6L Diesel · AV12 JUU

This 2012 Ford Fiesta has maintained a clean MOT history with no recorded defects across five consecutive tests, including the most recent pass on 18 December 2025 at 89,321 miles. The absence of advisories or repeated failures suggests the vehicle has undergone consistent, if not rigorous, maintenance. However, the single failure in December 2024—just two days before its subsequent pass—indicates a potential oversight in pre-test preparation rather than a systemic issue. The most recent test, just over seven months ago, remains within the DVSA’s acceptable window for a 14-year-old vehicle, though buyers should verify whether the current mileage aligns with the last recorded figure to rule out odometer tampering. The vehicle’s mileage progression averages approximately 6,380 miles annually, a rate consistent with typical usage for its age. There are no significant gaps in testing, though the December 2024 failure—occurring at 86,898 miles—followed closely by a pass at 86,900 miles raises minor suspicion. The 3,661-mile jump between the 2023 and 2022 tests (84,660 to 80,324) is unusually large for a single year, suggesting either a period of reduced use or an error in mileage logging. Without additional service records, the exact cause remains unclear, but the pattern does not indicate aggressive driving or neglect. Given the lack of MOT defects, the primary focus for an in-person inspection should centre on high-wear components that are not routinely tested. The suspension—particularly the rear coil springs and bushes—will require assessment for excessive sag or cracking, as will the front and rear brake calipers for binding or uneven pad wear. Corrosion should be scrutinised at the wheel arches, sills, and subframe mounts, especially given the vehicle’s age. The exhaust system’s integrity must also be checked for leaks or rust-through, as these are common failure points in Fiestas of this era. Tyre tread depth and lateral wear patterns, though not flagged in MOTs, warrant verification to ensure no hidden damage from uneven loading or alignment issues.