2014 Vauxhall Combo 1.2L Diesel · AV64 NNC

This Vauxhall Combo has demonstrated a stable roadworthiness record over the past two years, with no defects or advisories recorded in any of the five consecutive MOT tests. The most recent test on 2025-12-09—just five months ago—confirmed the vehicle passed without fail, despite a rare duplicate entry on the same date. This consistency suggests the vehicle has been maintained at a basic level, though the absence of advisories means critical components like suspension bushes, coil springs, or binding calipers were not flagged during inspection. The lack of recurring failures implies no obvious pattern of neglect, but the record does not reveal whether routine servicing—such as brake fluid changes, timing belt inspections, or differential fluid checks—has been performed. The recorded mileage of 140,335 miles over approximately 11 years aligns with typical usage patterns for a vehicle of this age, averaging around 11,700 miles annually. There are no significant gaps in the MOT history, and the mileage progression appears steady, with no abrupt jumps or prolonged periods of inactivity. For example, the vehicle accumulated roughly 5,000 miles between the 2024 and 2025 tests, a rate that does not suggest excessive wear beyond normal expectations. However, the lack of service records means potential hidden issues—such as degraded CV joints, worn synchronisers, or corrosion in wheel arches—cannot be confirmed. Given the clean MOT history, a buyer should prioritise an independent inspection of high-wear areas that are not routinely tested. Focus on the suspension, particularly the rear bushes and coil springs, as these are common failure points in this model and often go unnoticed until they compromise handling. The brakes, while not failed in MOTs, should be checked for uneven wear or binding calipers, especially if the vehicle has been driven hard or in wet conditions. Corrosion is another critical factor; inspect wheel arches, sills, and the subframe for rust penetration, as this can compromise structural integrity. Finally, verify the condition of the exhaust system for leaks or excessive sagging, as this may indicate suspension or mounting component failure. The absence of advisories does not guarantee these areas are flawless, only that they passed the basic MOT checks.