2014 Suzuki Swift 1.2L Petrol · AY14 XOB

The Suzuki Swift has demonstrated a stable roadworthiness trend over the past two years, with all tests passing at the recorded mileages. The most recent test in February 2026 at 46,886 miles confirmed the vehicle's compliance with roadworthiness standards, with no defects noted. The consistent passing results suggest that the vehicle has been well-maintained, with no recurring issues to indicate worsening mechanical conditions. However, the two failed tests at the same mileages in February 2025 and February 2026, without any defects recorded, remain unexplained and warrant further investigation. This could indicate a potential administrative error or a need for closer scrutiny of the test process. The vehicle's mileage pattern is unusually low for its age, with an average of approximately 3,907 miles per year over the past 12 years. This suggests either very light use or significant periods of inactivity, which could have implications for the condition of consumable components like tyres, brake pads, and wiper blades. The most recent test in February 2026 was conducted at 46,886 miles, which is a substantial increase from the previous test in February 2025 at 44,259 miles, indicating a higher mileage accumulation rate in the past year. This could reflect a change in usage or a need for more frequent maintenance checks. A potential buyer should inspect the vehicle's suspension system for signs of wear, particularly the bushes and coil springs, given the low mileage pattern. The brakes should also be thoroughly checked for any signs of wear or potential issues, such as binding calipers or uneven disc wear. Additionally, the vehicle's structural integrity should be assessed for any signs of corrosion or rust, especially in areas prone to moisture, such as the undercarriage and wheel arches. The absence of recurring defects in the MOT history suggests that the vehicle has been well-maintained, but the unexplained failed tests and low mileage pattern warrant a careful inspection to ensure all components are in good working order.