2019 Nissan Juke 1.6L Petrol · BA19 JDZ

The 2019 Nissan Juke has demonstrated consistent MOT compliance over the past three tests, with the most recent inspection on 2026-02-10 at 52,022 miles resulting in a clean pass. There are no recorded defects or advisories in any of the five MOT entries, indicating a stable maintenance pattern without recurring mechanical failures. The vehicle’s roadworthiness remains sound based on the available data, though the lack of advisories does not preclude unseen wear—particularly in areas not routinely tested, such as suspension bushes or drivetrain components. The absence of failures suggests either diligent servicing or a vehicle that has not yet reached critical wear thresholds. The mileage progression reveals a steady accumulation of approximately 7,400 miles annually, which aligns with typical usage for its age. The most notable gap is between the 2023-03-29 test at 32,279 miles and the 2024-02-16 test at 39,600 miles—a span of just over 11 months—indicating no prolonged periods of inactivity. The 2025 tests are unusual, with two entries on the same date (both at 45,652 miles), one passing and one failing, though the failure record is blank. This anomaly may reflect a clerical error or a test centre oversight rather than a mechanical issue, as no defects were logged. Overall, the mileage pattern does not suggest excessive wear from high annual mileage or neglect from low usage. Given the clean MOT history, a buyer should prioritise a thorough inspection of suspension components, particularly the rear suspension bushes and coil springs, as these are common wear items not always captured in MOT tests. The brakes, while not failed, should be checked for uneven wear or binding calipers, especially if the vehicle has experienced rapid mileage accumulation. Corrosion checks are also warranted, particularly around wheel arches, sills, and the subframe, as these areas are prone to hidden deterioration. The lack of advisories in prior tests means no prior issues were flagged, but a pre-purchase inspection will confirm whether any components have degraded beyond serviceable limits.