2016 KIA Sorento 2.2L Diesel · BP65 AYK

Recurring tyre wear on the inner edges and thinning brake components represent the most consistent mechanical themes in this vehicle's recent MOT history. While the most recent test on 20 February 2026 resulted in a pass with no defects, the preceding years show a pattern of advisories related to tyre degradation and brake wear. A major failure occurred in January 2025 regarding inoperative headlamp cleaning devices for the LED or HID units, though this was rectified for the subsequent pass. The trend suggests that while the vehicle is currently meeting minimum standards, there is a historical tendency for consumables and alignment-related wear to reach advisory levels. The recorded mileage of 119,947 miles over approximately ten years equates to an average annual accumulation of roughly 12,000 miles. This usage pattern is consistent with typical long-distance or mixed-use driving for a vehicle of this age and class. Mechanically, this level of mileage means that components such as suspension bushes, dampers, and drivetrain mounts will have undergone significant cycles of stress. The steady mileage accumulation suggests the vehicle has not been subject to long periods of stationary use, which typically presents different risks such as seized calipers or perished rubber seals, but instead faces the standard wear associated with regular road use. Prospective buyers should pay close attention to the rear axle and suspension geometry due to the repeated advisories regarding tyres being worn on the inner edges. This pattern often indicates incorrect wheel alignment or excessive camber, which can be caused by worn suspension bushings or compromised control arms. During a test drive, listen for any knocking or clunking sounds when traversing uneven surfaces and check for any pulling or instability when traveling at motorway speeds. If the alignment is not corrected, tyre replacement costs will continue to accrue more rapidly than expected. The history of thinning brake pads and worn rear brake discs warrants a physical inspection of the braking system. On a test drive, pay close attention to the brake pedal feel, looking for any pulsation or judder which could indicate warped discs, or any grinding noises that might suggest the pads have reached the metal backing plate. Additionally, given the 2025 failure regarding the headlamp cleaning system, verify that the high-pressure jets for the LED headlamps are functioning correctly to ensure optimal visibility, as these are critical components for the vehicle's lighting system integrity.