2016 Jaguar F-Pace 2.0L Diesel · BR66 BEN

The vehicle most recently passed its MOT on 14 October 2025 with no defects recorded, which is a positive indicator of its current roadworthiness. Looking at the broader history, the maintenance trend appears stable. While there were minor advisories regarding braking and steering components in 2024 and tyre wear in 2022, the absence of failures and the clean result of the latest test suggest that the vehicle is being kept in a satisfactory condition. With a recorded mileage of 69,637 miles over approximately ten years, the vehicle has averaged roughly 6,964 miles per year. This is a typical usage profile for a premium SUV of this age, suggesting that the drivetrain and interior have not been subjected to excessive wear. However, this moderate mileage means that certain components may be more susceptible to age-related degradation rather than wear-and-tear, making the verification of a consistent service history essential. Prospective buyers should specifically verify that the advisories from the 2024 test have been addressed. The reported play in the nearside front track rod end ball joint can lead to imprecise steering and accelerated tyre wear; during a test drive, listen for any clicking or knocking sounds when turning the steering wheel at low speeds. Additionally, the thin offside rear brake pads should have been replaced. Ensure there is no brake shudder or uneven pulling under deceleration, and inspect the brake discs for any significant lip or corrosion. Given the vehicle is now a decade old, physical inspections should extend beyond the MOT history. Examine all tyre sidewalls for signs of perishing or hairline cracking, as rubber degrades over time regardless of tread depth. Check the health of the 12V battery and inspect the brake calipers for any binding that may have occurred during periods of inactivity. Finally, confirm that calendar-based maintenance, such as the replacement of brake fluid and engine coolant, has been performed according to the manufacturer's intervals to prevent internal corrosion and ensure long-term mechanical reliability.