2018 Lexus RX 3.5L Hybrid electric (clean) · BV68 MYW

The vehicle most recently passed its MOT on 4 December 2025 with no defects recorded. Looking at the maintenance trend, the vehicle appears to be stable. While advisories were noted in 2023 for a worn tyre and in 2024 for thin rear brake pads, the clean result in the most recent test suggests these items were addressed. This indicates a reactive but effective maintenance pattern where wear-and-tear components are serviced before they cause an MOT failure. With 113,928 miles recorded over approximately eight years, this Lexus RX has been driven at a high annual rate of roughly 14,241 miles. This level of usage suggests frequent long-distance travel, which is generally less detrimental to the engine than short urban trips, but it does mean that mechanical components such as the suspension, drivetrain, and braking systems have undergone significant cumulative wear. Prospective buyers should expect that many consumables and rubber components may be approaching the end of their reliable service life. During a test drive, it is essential to monitor the braking system and steering response closely. The 2024 advisory regarding thin inner rear brake pads suggests the potential for uneven pad wear or binding calipers; listen for any scraping sounds and feel for any shuddering or pulsing through the brake pedal. Furthermore, the 2023 advisory concerning a tyre worn on the edge is a strong indicator of potential alignment or suspension geometry issues. Ensure the vehicle tracks straight and check the current tyres for any uneven wear patterns, which would necessitate a professional four-wheel alignment. Given the high mileage, a thorough inspection of the vehicle's underbody and service history is required. Check the suspension for leaking dampers, perished bushes, or fatigued coil springs, which often manifest as clunking noises over uneven surfaces. It is also vital to verify that major service items, such as transmission fluid, differential oil, and coolant, have been changed according to the manufacturer's schedule rather than just basic oil changes. Finally, inspect the engine bay for any signs of fluid weeping and check the condition of the drive belts to ensure they are not cracked or perishing.