2004 Ford Fusion 1.6L Petrol · BX53 KWL
2004 Ford Fusion (1.6L, petrol). First registered 30 Jan 2004. Recorded mileage 100,824 miles. MOT expired on 07 Jun 2025.
- Make & Model
- FORD FUSION
- Year / Origin
- 2004 · Birmingham
- Safety Recall
- Unknown
- MOT Status
- Expired on 07 Jun 2025
- Road Tax
- —
- Recorded Mileage
- 100,824 mi
- ULEZ Compliance
- Check Required (Pre-Euro 4 Petrol)
- Fuel & Engine
- Petrol · 1.6L
- Reliability Guide
- Common Faults
Thinking of buying this vehicle? Free MOT and tax checks do not cover legal ownership. If outstanding finance exists, finance companies have legal right to repossess without compensation.
BX53 KWL Key Findings
- 5 MOT tests recorded
- Latest MOT failed on 05/06/2025
- 100,824 miles recorded at latest MOT
- 3 historical MOT failures
Derived directly from the recorded DVSA and DVLA data shown on this page.
BX53 KWL MOT History
Interpretation generated from the recorded test data above — not an official DVSA statement and not a substitute for an independent inspection.
5 MOT tests are recorded for this 2004 Ford Fusion (BX53 KWL) between June 2023 and June 2025.
The record contains 2 passes and 3 failures.
The most recent test on 05 June 2025 was a fail; the vehicle has not passed its last recorded MOT.
BX53 KWL Mileage History
- 08/06/202386,664 mi
- 08/06/202386,665 mi+1 mi
- 04/06/202493,975 mi+7,310 mi
- 05/06/202493,975 mi
- 05/06/2025100,824 mi+6,849 mi
Average of roughly 7,104 miles per year across 5 recorded odometer readings.
Technical Specifications
Core Specifications
Identification & Status
Dimensions & Weights
Diagnostic & Valuation Intelligence
Estimate current market value
Generate an instant valuation benchmark based on live market listings, vehicle mileage, and recent dealer auction figures.
Known faults for Ford Ford Fusion (Europe)
Our database tracks 3 specific mechanical faults and recurring failure patterns identified across UK MOT testing stations for this generation.
MOT Roadworthiness: Poor
This rating reflects historical MOT pass rates and recurring advisory wear patterns from official DVSA test logs. Note that roadworthiness does not verify outstanding finance, insurance write-offs, or stolen records.
Verify lender finance agreements, insurance write-offs, police stolen registers, and mileage rollback.
Common Problems: FORD FUSION
Known issues reported by owners and MOT testers.
- Pollen Filter Housing Bulkhead Water Ingress(Moderate)
The cabin pollen filter on the Ford Fusion is located within the heater bulkhead beneath the windscreen scuttle panel. Over time, the factory foam weather-seal on the pollen filter housing cover deteriorates, dries out, and degrades from exposure to heat and moisture. Rainwater running off the windscreen bypasses the degraded seal and flows directly into the passenger footwell, soaking sound-deadening insulation and risking corrosion to the interior wiring harness and fusebox.
- 1.4 TDCi Common-Rail Fuel Injector Copper Washer Leak(Moderate)
On 1.4-litre Duratorq TDCi diesel engines, the copper crush washers sealing the base of the fuel injectors against the cylinder head fire face can harden, erode, and fail. High-pressure combustion gases blow past the failed copper seal, venting hot diesel soot, hydrocarbons, and unburnt fuel into the injector wells. Over time, this baked soot solidifies into a hard, tar-like black carbon crust known as black death, damaging the injector body, creating exhaust fumes in the cabin, and making injector removal difficult.
- Durashift EST Automated Manual Transmission Actuator Fault(Serious)
The optional Durashift Electronic Shift Transmission (EST) utilizes an automated mechanical clutch and electro-mechanical gear selector actuators mounted to a standard manual gearbox. Over time, internal electric actuator motors suffer brush wear, moisture ingress, or solder joint failure on the integrated control module. When the transmission control unit loses position calibration or cannot actuate the clutch, the system enters fail-safe mode, flashing a transmission warning on the instrument cluster and preventing engine cranking.
Similar Vehicles
Similar Vehicles Checked Recently
Plate Neighbors
Batch Registration Neighbors (BX53 Series)
Vehicles registered in the same regional DVLA batch as BX53KWL.
YAMAHA
TOYOTA
COROLLA
LEXUS
RX300
CITROEN
RELAY
PEUGEOT
406
SUZUKI
WAGON-R+
LAND ROVER
FREELANDER
NISSAN
PICKUP
NISSAN
NAVARA
MERCEDES-BENZ
C
HARTFORD
VR125Z
CITROEN
BERLINGO
FORD FUSION Model Intelligence & Reliability
Verified MOT failure trends, buying advice, and technical directory specifications.
Owner-reported defects, recurring MOT failure points, and estimated repair costs.
Browse production generations, registration statistics, and trim variants.
Historical MOT pass rates and DVLA records for 2004 model year cars.
- Pollen Filter Housing Bulkhead Water IngressModerate
The cabin pollen filter on the Ford Fusion is located within the heater bulkhead beneath the windscreen scuttle panel. Over time, the factory foam weather-seal on the pollen filter housing cover deteriorates, dries out, and degrades from exposure to heat and moisture. Rainwater running off the windscreen bypasses the degraded seal and flows directly into the passenger footwell, soaking sound-deadening insulation and risking corrosion to the interior wiring harness and fusebox.
- 1.4 TDCi Common-Rail Fuel Injector Copper Washer LeakModerate
On 1.4-litre Duratorq TDCi diesel engines, the copper crush washers sealing the base of the fuel injectors against the cylinder head fire face can harden, erode, and fail. High-pressure combustion gases blow past the failed copper seal, venting hot diesel soot, hydrocarbons, and unburnt fuel into the injector wells. Over time, this baked soot solidifies into a hard, tar-like black carbon crust known as black death, damaging the injector body, creating exhaust fumes in the cabin, and making injector removal difficult.
- Durashift EST Automated Manual Transmission Actuator FaultSerious
The optional Durashift Electronic Shift Transmission (EST) utilizes an automated mechanical clutch and electro-mechanical gear selector actuators mounted to a standard manual gearbox. Over time, internal electric actuator motors suffer brush wear, moisture ingress, or solder joint failure on the integrated control module. When the transmission control unit loses position calibration or cannot actuate the clutch, the system enters fail-safe mode, flashing a transmission warning on the instrument cluster and preventing engine cranking.
Regional DVLA Registration Directory
Vehicles and registration batches issued by regional DVLA offices across the UK.
Recently Checked UK Vehicles
Live vehicle history checks and MOT records recently queried by UK car buyers.