2019 Honda CR-V 2.0L Hybrid electric · C6 JSV

The vehicle most recently passed its MOT on 27 May 2026. The overall maintenance trend is exceptionally stable, as the vehicle has maintained a consistent record of passes since 2022 with no recorded failures or major defects. The emergence of a single advisory in the most recent test indicates a transition from a period of flawless reports to the expected onset of age-related wear on consumable components. With 51,601 miles recorded over approximately seven years, the vehicle has averaged roughly 7,372 miles per annum. This usage rate is considered typical for a family SUV of this vintage and suggests a balanced duty cycle. This level of use generally avoids the accelerated wear on drivetrain and suspension components associated with high-mileage vehicles, while also avoiding the risks of prolonged standing, such as seized brake calipers or perished rubber seals. The most recent MOT advisory specifically identifies the nearside rear tyre as being damaged, cracking, or perishing. This is typically a result of the rubber compound degrading over time rather than tread wear from mileage. A prospective buyer should physically inspect the sidewalls of all four tyres for similar hairline cracking or dry rot, as tyres often perish based on their calendar age. During a test drive, the buyer should listen for any unusual road noise or feel for vibrations that could indicate structural degradation of the tyre carcass. Given the otherwise clean MOT history, inspection should focus on time-based maintenance and general age-related health. It is essential to verify the service book stamps to ensure that engine oil and filters have been replaced according to the manufacturer's intervals, as fluid degradation occurs regardless of the mileage covered. Additionally, the buyer should check the brake discs for surface corrosion and verify the health of the 12V battery. Finally, a visual inspection of the suspension bushes and coil springs for any signs of splitting or corrosion is advised to ensure the chassis remains in optimal condition.