2019 Audi A3 1.5L Petrol · C9 CMB

This 2019 Audi A3 has maintained a consistent roadworthiness record across all MOT tests, with the most recent inspection on 19 May 2025—just over two months prior to today’s date—showing no defects and a clean pass. The absence of advisories or failings in any of the four recorded tests suggests the vehicle has not experienced recurring mechanical issues that would warrant concern. However, the lack of any recorded faults does not preclude the need for a thorough independent inspection, particularly given the vehicle’s age and mileage. The recorded mileage progression indicates a steady usage pattern, with approximately 6,158 miles logged annually, which aligns with typical low-to-moderate usage for a vehicle of this age. The most notable gap between tests occurs between the February 2023 and January 2022 MOTs, where mileage increased by 7,496 miles in just over a year—slightly above the average annual mileage but not alarming. Earlier intervals, such as the 5,932 miles covered between the May 2024 and May 2025 tests, remain consistent with the overall trend. There is no evidence of prolonged periods of disuse or rapid degradation, though the lack of service records means internal maintenance history remains unverified. Given the clean MOT history, a buyer should prioritise an inspection of high-wear components that are not routinely checked during an MOT. The suspension—particularly coil springs, bushes, and dampers—should be examined for uneven wear or fluid leaks, as these are critical for handling and safety but not always flagged in a standard test. Brake systems, including calipers, pads, and discs, warrant close scrutiny, especially if the vehicle has been driven hard or in stop-start conditions, as binding or uneven wear could develop without immediate MOT failure. Additionally, the underbody should be inspected for corrosion, particularly around wheel arches, subframes, and exhaust mounting points, as this is a common issue for vehicles of this age and mileage. Finally, the exhaust system should be checked for leaks or damage, as emissions-related faults are often the first to appear if the catalytic converter or related components are degrading.