2012 Audi Q3 2.0L Diesel · CC02 ALG

The vehicle is currently roadworthy, but the most recent inspection indicates a sudden decline in maintenance standards. While the car achieved three consecutive clean passes between 2023 and 2025, the January 2026 test at 141,263 miles revealed significant mechanical failures. The transition from a clean record to a failure involving structural corrosion and worn components suggests that the previous owner only addressed faults when necessary to pass the MOT test rather than following a preventative service schedule. At 141,263 miles over 14 years, the Audi has averaged approximately 10,000 miles per year, which aligns with typical UK driving patterns for a premium SUV. The mileage data shows consistent usage, with roughly 6,000 to 7,000 miles covered between each annual test from 2023 to 2026. However, the high mileage puts considerable stress on heavy-duty components, particularly the vehicle's suspension geometry and braking hardware, which are now reaching the end of their operational life. A buyer must prioritise a thorough physical inspection of the rear suspension and braking system. The January 2026 failure flagged a corroded offside rear lower suspension arm and a seriously weakened brake disc, indicating that surface rust has compromised the structural integrity of these parts. The uneven wear noted on the offside rear tyre also points to a potential alignment issue or worn bushings that must be verified to prevent further tyre damage. You should check for advanced corrosion across the subframe and mounting points to ensure the rust found on the suspension arm is not systemic throughout the chassis.