2022 Volkswagen Caddy C20 Commerce TDI 2.0L Diesel · CU22 VUX

The most recent MOT test conducted on 9 July 2025 resulted in a pass with no recorded defects or advisories. This indicates that at the time of testing, the vehicle met all essential DVSA safety and environmental standards. Based on the available data, the maintenance trend appears stable, suggesting the vehicle has been maintained to a standard that avoids the common mechanical failures typically associated with commercial utility vehicles. The recorded mileage of 36,912 miles over a four-year period reflects an annual usage rate of approximately 9,228 miles, which is consistent with typical light commercial use. This moderate mileage profile is advantageous as it suggests the engine and drivetrain have been used regularly enough to prevent excessive carbon buildup in the diesel particulate filter, yet not so heavily that major components like the clutch or turbocharger are nearing the end of their primary service life. The lack of rapid mileage accumulation reduces the likelihood of premature wear on consumables such as brake pads and suspension components. Since the MOT record is clean, the physical inspection should focus on age-related degradation and preventative maintenance. During a test drive, listen for any suspension clunks or knocks that might indicate worn bushes or failing dampers, and check for any brake shudder or pulling to one side, which could signal warped discs or binding calipers. Inspect the tyres thoroughly for signs of perishing or sidewall cracking, which can occur even if tread depth is sufficient, particularly if the vehicle has been stationary for periods. It is also vital to verify the service book for consistent stamps, ensuring that oil changes and fluid replacements, such as brake fluid and coolant, have been conducted on a time-basis rather than just a mileage basis to prevent internal corrosion and degradation. Check the health of the 12V battery and inspect the engine bay for any signs of weeping from seals or hoses. Finally, ensure the underside is free from significant corrosion and that the exhaust system remains securely mounted to maintain overall structural integrity.