2014 Jeep Compass 2.1L Diesel · D7 DPP

The 2014 Jeep Compass has maintained a consistent MOT history, passing all five tests without defects or advisories since November 2021. The most recent inspection on 17 November 2025—just six months prior to today—confirms the vehicle remains roadworthy under current DVSA standards. There is no evidence of recurring mechanical failures or advisory notes that would suggest deteriorating structural or safety-critical components. The absence of any failings across nearly 7,000 miles since the last test indicates the vehicle has likely been subjected to regular, if not rigorous, maintenance. However, the lack of advisories does not preclude hidden wear, particularly in high-stress areas like suspension mounts or drivetrain components, which may not always trigger an MOT failure until they reach critical thresholds. The recorded mileage of 68,559 miles over a 12-year span equates to an average of approximately 5,700 miles annually, which is unusually low for a vehicle of this age. The most significant mileage gap occurs between the December 2021 test (51,695 miles) and the November 2022 test (55,405 miles), a span of 11 months with just 3,710 miles logged. This suggests prolonged periods of inactivity, which could accelerate degradation of fluids, seals, and elastomeric components such as suspension bushes and windscreen wiper blades. Conversely, the steady progression of mileage in subsequent years—around 4,000 to 5,000 miles annually—implies recent use, though it remains well below the average for a vehicle of this vintage. The lack of advisories during these intervals does not rule out deferred maintenance, particularly if the vehicle was stored without proper precautions. Given the clean MOT record, a buyer should prioritise an in-person inspection of suspension components, including coil springs, bushes, and shock absorbers, for signs of dry rot or excessive play. The brakes, particularly the rear calipers and discs, warrant close examination for binding or uneven wear, as recurring brake issues are often masked until they become severe. Structural integrity should also be assessed, focusing on the sills, wheel arches, and subframe for corrosion, which can compromise the vehicle’s handling and safety. Fluid levels—engine oil, coolant, power steering, and differential—should be checked for degradation or contamination, as prolonged inactivity can lead to sludge formation or seal failure. Tyre tread depth and lateral wear patterns remain critical, though the MOT’s absence of defects suggests they have been recently serviced. Finally, the exhaust system should be inspected for leaks or rust-through, as catalytic converter failures are not always detected until they exceed emissions thresholds.