2022 Suzuki DL 650 AM2 0.6L Petrol · DG22 ADV

The most recent MOT inspection on 25 August 2026 resulted in a pass with no defects recorded, maintaining a perfectly clean and stable testing history. The consistency across the previous recorded tests in 2025 indicates that the vehicle has consistently met all regulatory safety and environmental standards without any history of mechanical failures or advisory warnings. This suggests a high level of baseline roadworthiness and a maintenance profile that has successfully avoided common points of failure. The recorded mileage of 6,689 miles over approximately four years is notably low, averaging roughly 1,672 miles per year. While this indicates minimal mechanical wear on the engine, transmission, and braking systems, such low usage often implies that the vehicle has spent extended periods stationary. From a mechanical perspective, low-mileage vehicles can sometimes suffer from different issues than high-mileage ones, specifically regarding the degradation of components that rely on regular movement and fluid circulation to remain in optimal condition. Because the MOT history is clean and the mileage is low, your inspection should prioritise age-related degradation over wear-based components. Closely examine the tyres for any signs of perishing, such as sidewall cracking or a hard, glazed appearance, as rubber can degrade due to age and UV exposure regardless of tread depth. You should also inspect the drive chain for signs of corrosion, stiffness, or uneven tension, which are common symptoms of a vehicle that has been standing for long periods. Additionally, check the brake discs for surface corrosion or pitting and ensure the calipers are not binding, which can occur when seals dry out due to inactivity. It is also vital to verify the service history against the calendar rather than just the mileage. Many manufacturers mandate fluid changes, such as brake fluid, coolant, and engine oil, based on annual intervals to prevent moisture contamination and chemical breakdown. Confirm that these time-based services have been carried out. During a test drive, pay close attention to the responsiveness of the throttle, the smoothness of the gear changes, and the absence of any unusual suspension clunks or steering oscillations, which could indicate that seals or bushes have been affected by prolonged periods of standing.