2020 Mitsubishi L200 Barbarian X DI-D Auto 2.3L Diesel · DO20 HTY

The vehicle most recently passed its MOT on 1 July 2026 with no defects recorded. Looking at the overall history, the maintenance trend is stable and improving. While the vehicle suffered a failure in 2023 due to major defects involving the windscreen wipers and significant cuts in both front tyres, these were promptly addressed. The subsequent three years of testing have remained largely clear of significant issues, suggesting a consistent approach to roadworthiness and the timely replacement of wear-and-tear items. With a recorded mileage of 65,283 miles over approximately six years, the vehicle has averaged roughly 10,880 miles per annum. This represents a typical usage profile for a modern utility vehicle, avoiding the risks associated with excessive hard wear or the degradation caused by prolonged periods of standing. At this mileage, the drivetrain and suspension components should still be in good health, although the vehicle is entering a phase where routine replacement of consumables and adherence to scheduled major services become critical to maintaining long-term reliability. Prospective buyers should note the 2023 advisory regarding the engine cover and under tray restricting a full inspection. It is therefore essential to perform a thorough physical inspection of the chassis and underbody to check for signs of corrosion, particularly on the frame rails and suspension mounting points, which can be prevalent in this vehicle class. During a test drive, pay close attention to the automatic transmission for any hesitation or shudder and ensure the four-wheel-drive system engages and disengages smoothly without unusual clunks or vibrations. Given the age of the vehicle, verify the service history to ensure that calendar-based fluid changes, such as brake fluid and coolant, have been performed regardless of the mileage. Inspect the current tyres for sidewall cracking or perishing, as the previous history of tyre cuts suggests the vehicle may have been used in environments prone to debris. Finally, check the condition of the brake discs for surface corrosion and ensure the calipers are not binding, which can occur if the vehicle has spent any significant time stationary between journeys.