2017 Hyundai Ioniq 1.6L Hybrid electric (clean) · DV17 VDJ

The vehicle is currently roadworthy, having passed its most recent MOT on 2025-07-11 at 82,228 miles, though it had previously failed the same test due to an offside front headlamp aiming too low and a deteriorated registration plate. The failure was minor and rectifiable, with no safety-critical defects recorded in the subsequent pass, indicating that the issue was addressed promptly. The maintenance trend over the past three years shows stability, with no significant mechanical failures or recurring structural concerns—each annual test since 2022 has been passed without defects until the latest dual outcome. This suggests consistent upkeep, though the repeated headlamp and plate issues point to a pattern of minor neglect in exterior lighting and trim. The mileage accumulation aligns closely with average use for a nine-year-old vehicle, averaging approximately 9,136 miles per year. From 2022 to 2023, the vehicle gained about 11,851 miles; from 2023 to 2024, it increased by 8,607 miles; and from 2024 to 2025, it added 8,031 miles—indicating steady usage with no prolonged gaps or sudden spikes. The absence of any major defect entries between 2022 and 2024 reflects good mechanical condition during those periods, while the 2025 test results confirm that the vehicle remains within acceptable tolerances despite the minor lighting faults. A buyer should inspect the front suspension and steering components in person, particularly the offside front hub and headlamp mounting assembly, given the repeated headlamp aim issue. The tester flagged the headlamp as being too low, which may indicate misalignment due to worn suspension bushes, damaged control arms, or frame distortion. Additionally, the deteriorated front registration plate warrants checking for corrosion around the mounting brackets and surrounding bodywork, as this could signal underlying rust in the front bumper or fender area. Brake discs, calipers, and rear suspension should also be examined, especially if there are signs of uneven wear or binding, as these systems are critical for long-term reliability and safety.