2020 Audi Q5 2.0L Petrol · E1 MWC

The vehicle's overall roadworthiness is currently passing, as the latest MOT on 2026-02-27 at 13,517 miles was passed with no recorded defects. This indicates that the maintenance trend has been stable for the current period, with no sudden deterioration or recurring structural failures detected. The absence of defects in the September 2023 test at 7,702 miles suggests that the vehicle has maintained consistent mechanical condition over the past three years. Regarding the mileage pattern, the data shows a relatively low accumulation rate of 6 years and 13,517 miles, which is consistent with the vehicle's age and usage profile. The gap between the 2024 and 2023 tests is minimal, indicating that the vehicle has not experienced significant wear on the drivetrain or suspension bushings since the previous inspection. While the mileage is low, it is important to note that the absence of defects in the September 2023 test at 7,702 miles suggests that basic upkeep, such as regular tire rotation and wheel alignment, may have been skipped, which could contribute to the current low mileage. For a buyer inspecting the vehicle in person, the primary focus should be on checking the condition of the suspension components, particularly the bushings and coil springs, as these are prone to wear and can cause issues if neglected. The brakes should be inspected for any signs of corrosion, binding, or excessive play, as these components are critical for safety and must remain in good working order. Additionally, the exhaust system should be examined for emissions issues, and the drivetrain should be checked for binding calipers or worn bearings. A thorough physical inspection is required to confirm that no structural integrity has been compromised since the last MOT.