2018 Toyota Yaris 1.5L Hybrid electric · ET68 OFO

The 2018 Toyota Yaris presents a stable and improving mechanical trajectory, culminating in a clean pass on 21 May 2026 at 54,553 miles with zero defects recorded. Historically, the vehicle suffered from sporadic tyre wear and damage, but the absence of any advisories or failures in the most recent test indicates these consumable issues have been addressed. The trend is clearly resolving, moving from recurring tyre defects between 2022 and 2025 to a fully unblemished record this year. Accumulating 54,553 miles over eight years equates to roughly 6,819 miles annually, a typical figure suggesting regular, light use rather than prolonged standing or high-mileage fleet work. The mileage progression is consistent, showing a steady accumulation of approximately 5,000 to 6,000 miles per year. The gap between the 2025 test at 49,428 miles and the 2026 test at 54,553 miles represents a slightly higher annual jump of 5,125 miles, but this remains well within normal parameters and does not suggest severe neglect or excessive recent wear on drivetrain components. Despite the clean 2026 certificate, the recurring nature of tyre defects—specifically edge wear and perishing flagged in April 2023 and April 2025—warrants a thorough physical inspection of the wheel alignment and suspension geometry. A buyer should closely examine the inner tyre sidewalls and check for uneven tread wear, which often points to worn suspension bushes or misaligned tracking. The tester flagged a nail puncture in May 2022, raising the question of whether the repair was conducted to a proper standard, so verifying the spare wheel condition and looking for any sidewall bulging remains prudent. While the MOT record shows no structural corrosion or braking faults, the vehicle's age and mileage mean a hands-on assessment of the brake discs and coil springs is essential. Low-mileage vehicles often suffer from corroded brake surfaces due to standing, or seized components from lack of use. A test drive should specifically evaluate for any binding calipers or uneven braking pull, ensuring the mechanical integrity matches the clean paperwork.