1988 Reliant Rialto 0.8L Petrol · F645 FOD
1988 Reliant Rialto (0.8L, petrol). First registered 12 Aug 1988. MOT expired on 21 May 2019. Currently declared SORN.
- Make & Model
- RELIANT RIALTO
- Year / Origin
- 1988 · Nottingham
- Safety Recall
- Unknown
- MOT Status
- Expired on 21 May 2019
- Road Tax
- SORN
- Recorded Mileage
- —
- ULEZ Compliance
- Check Required (Pre-Euro 4 Petrol)
- Fuel & Engine
- Petrol · 0.8L
- Reliability Guide
- Common Faults
Thinking of buying this vehicle? Free MOT and tax checks do not cover legal ownership. If outstanding finance exists, finance companies have legal right to repossess without compensation.
F645 FOD Key Findings
- No MOT test records found for this registration
- MOT expired on 21/05/2019
Derived directly from the recorded DVSA and DVLA data shown on this page.
MOT Status
No MOT history available
No MOT test records were found for this registration. DVSA’s digital archive only covers tests from 2005, so a vehicle that has not been tested since then may legitimately have no visible history.
Technical Specifications
Core Specifications
Identification & Status
Dimensions & Weights
Diagnostic & Valuation Intelligence
Estimate current market value
Generate an instant valuation benchmark based on live market listings, vehicle mileage, and recent dealer auction figures.
Known faults for Reliant Reliant Rialto
Our database tracks 3 specific mechanical faults and recurring failure patterns identified across UK MOT testing stations for this generation.
MOT Roadworthiness: Below Average
This rating reflects historical MOT pass rates and recurring advisory wear patterns from official DVSA test logs. Note that roadworthiness does not verify outstanding finance, insurance write-offs, or stolen records.
Verify lender finance agreements, insurance write-offs, police stolen registers, and mileage rollback.
Common Problems: RELIANT RIALTO
Known issues reported by owners and MOT testers.
- Front Suspension Swing-Arm and Steering Bush Wear(Moderate)
The single front wheel on the Rialto is mounted on an unsprung leading/trailing swing-arm arrangement carrying the full weight of braking and cornering. Road potholes and speed cushions accelerate wear on the front pivot needle roller bearings and steering headstock bushes. Neglected grease lubrication leads to excessive slack, causing vagueness in the steering, front tyre scuffing, and severe MOT failure.
- HT-E High-Compression Cylinder Head Warpage(Moderate)
In 1984, the Rialto 2 adopted the HT-E (High Torque Economy) engine featuring a modified cylinder head running a high 10.5:1 compression ratio and distinct yellow rocker cover. The high compression puts increased thermal stress on the thin alloy cylinder head. If the cooling system develops limescale buildup or the electric fan fails, the head quickly overheats and warps, blowing the head gasket between cylinders two and three.
- Rear Leaf Spring Shackle and Mounting Plate Corrosion(Moderate)
Although the Rialto's main chassis rails were galvanised from the factory, the rear suspension mounting plates, spring shackle pins, and steel U-bolts were not galvanised to the same thickness. Electrolytic reaction between dissimilar metals and road salt causes heavy corrosion around the rear spring eyes. Worn rubber bushes allow the spring leaves to twist, causing axle tramp under acceleration and unpredictable rear-end breakaway.
MOT Status
No MOT history available
No MOT test records were found for this registration. DVSA’s digital archive only covers tests from 2005, so a vehicle that has not been tested since then may legitimately have no visible history.
Similar Vehicles
Similar Vehicles Checked Recently
Plate Neighbors
Batch Registration Neighbors (F645 Series)
Vehicles registered in the same regional DVLA batch as F645FOD.
CZ
125
YAMAHA
XV535
TOYOTA
HILUX
AUSTIN
MINI 1000 CITY E
MERCEDES-BENZ
420
TOYOTA
MR2
NISSAN
SKYLINE
FIAT
DUCATO
VOLKSWAGEN
TRANSPORTER
VOLKSWAGEN
GOLF
BMW
R100
LAND ROVER
DEFENDER
RELIANT RIALTO Model Intelligence & Reliability
Verified MOT failure trends, buying advice, and technical directory specifications.
Owner-reported defects, recurring MOT failure points, and estimated repair costs.
Browse production generations, registration statistics, and trim variants.
Historical MOT pass rates and DVLA records for 1988 model year cars.
- Front Suspension Swing-Arm and Steering Bush WearModerate
The single front wheel on the Rialto is mounted on an unsprung leading/trailing swing-arm arrangement carrying the full weight of braking and cornering. Road potholes and speed cushions accelerate wear on the front pivot needle roller bearings and steering headstock bushes. Neglected grease lubrication leads to excessive slack, causing vagueness in the steering, front tyre scuffing, and severe MOT failure.
- HT-E High-Compression Cylinder Head WarpageModerate
In 1984, the Rialto 2 adopted the HT-E (High Torque Economy) engine featuring a modified cylinder head running a high 10.5:1 compression ratio and distinct yellow rocker cover. The high compression puts increased thermal stress on the thin alloy cylinder head. If the cooling system develops limescale buildup or the electric fan fails, the head quickly overheats and warps, blowing the head gasket between cylinders two and three.
- Rear Leaf Spring Shackle and Mounting Plate CorrosionModerate
Although the Rialto's main chassis rails were galvanised from the factory, the rear suspension mounting plates, spring shackle pins, and steel U-bolts were not galvanised to the same thickness. Electrolytic reaction between dissimilar metals and road salt causes heavy corrosion around the rear spring eyes. Worn rubber bushes allow the spring leaves to twist, causing axle tramp under acceleration and unpredictable rear-end breakaway.
Recently Checked UK Vehicles
Live vehicle history checks and MOT records recently queried by UK car buyers.