2022 Volvo XC40 + B3 Mhev Auto 2.0L Hybrid electric · FD72 EAM

The most recent MOT test conducted on 4 September 2025 resulted in a pass with no recorded defects or advisories. This indicates that at the time of testing, the vehicle met all essential safety and environmental standards required by the DVSA. As of the current date, the MOT remains valid, and the absence of recorded defects suggests a stable maintenance trend where the vehicle has been kept in a condition that meets all regulatory requirements without immediate structural or mechanical failures. The recorded mileage of 44,938 miles for a four-year-old vehicle represents an average annual usage of approximately 11,234 miles. This is a standard usage profile for a UK vehicle, suggesting regular use that prevents the issues associated with long periods of standing, such as seized calipers or fluid degradation, while avoiding the excessive wear seen in high-mileage commercial use. Mechanically, this mileage level means the vehicle is entering a period where wear on consumables like brake pads, discs, and suspension components becomes more relevant, though it remains relatively low for its age. As the MOT history is clean, your physical inspection should focus on age-related degradation and preventative maintenance. Examine the tyres thoroughly for any signs of perishing, sidewall cracking, or uneven wear patterns that could indicate alignment issues or worn suspension bushes. Given the mild-hybrid (MHEV) configuration, it is advisable to check the condition of the 12V battery, as modern Volvo systems are highly dependent on stable electrical voltage. During the test drive, pay close attention to the braking performance for any shuddering or pulling, and listen for any clunks or knocks from the suspension over uneven surfaces to ensure the dampers and springs are in good order. Finally, verify the service history to ensure that time-sensitive maintenance has been performed, as MOT tests do not cover the scheduled replacement of fluids. Confirm that brake fluid and engine oil changes have been carried out according to the manufacturer's intervals to prevent long-term component degradation. You should also inspect the underside of the vehicle for any evidence of minor fluid leaks or early-stage corrosion on exhaust components, ensuring that the vehicle's overall mechanical integrity matches its clean regulatory record.