2022 Vauxhall Combo 2300 Dynamic TD 1.5L Diesel · FE22 OTB

The vehicle most recently passed its MOT on 09 May 2025 with no recorded defects or advisories. Although a failure was noted two days prior on 07 May 2025, the immediate subsequent pass indicates that the necessary repairs were undertaken to bring the vehicle up to standard. The maintenance trend appears stable, as the most recent inspection shows no lingering concerns, suggesting that the vehicle was in a roadworthy condition at the time of the test. With 59,016 miles recorded, this Vauxhall Combo has been driven approximately 14,754 miles per year, which is considered high usage for a four-year-old vehicle. This level of mileage suggests the vehicle has likely been used for consistent commercial or long-distance duties rather than short, infrequent trips. While regular usage is beneficial for preventing the degradation of fluids and the seizing of brake components often seen in low-mileage vehicles, it does mean that mechanical wear on the drivetrain, suspension, and braking systems will be more advanced. You should expect consumable components to be closer to the end of their service life compared to a lower-mileage equivalent. During your physical inspection and test drive, pay close attention to the suspension and steering. Listen for any knocking or clunking sounds when driving over uneven surfaces, which could indicate worn suspension bushes, ball joints, or failing shock absorbers. Check the brake performance for any vibration through the pedal or steering wheel, which may indicate warped discs, or any pulling to one side which could suggest a binding caliper. Inspect the tyres thoroughly for uneven wear, particularly on the inner or outer edges, as this can be a symptom of incorrect wheel alignment or worn suspension geometry. Given the high mileage, it is essential to verify the service history to ensure that oil and filter changes have been carried out according to the manufacturer's schedule, as diesel engines require consistent lubrication to maintain turbocharger and injector health. Check the engine bay for any evidence of oil or coolant leaks and inspect the battery condition, as high-use vehicles can put significant strain on the electrical system. Finally, examine the underside for any signs of structural corrosion or exhaust system wear, although the frequent use of the vehicle should ideally help mitigate the buildup of surface rust on the braking components.