2013 KIA Sorento 2.2L Diesel · FH62 NRV

A major safety issue affecting 2011 to 2014 Sorento XM models involves the Hydraulic Electronic Control Unit (HECU) within the anti-lock braking system. Moisture or brake fluid can penetrate the internal electrical circuitry of the module over time, causing an electrical short circuit. This failure can result in unexpected electrical fires within the engine compartment, which can occur even when the vehicle is parked and the ignition is turned off. Kia issued safety recalls in the UK to inspect the HECU and install a revised multi-fuse assembly to prevent overcurrent events.

The rear suspension of the Sorento XM utilizes a multi-link arrangement mounted to a pressed steel subframe crossmember. Due to road salt accumulation, gravel blast, and trapped water in the hollow structural cavities, the rear subframe and the attachment areas for the upper and lower trailing arms suffer severe rust perforation. In advanced cases, the steel weakens and cracks around the suspension arm pivots, causing rear-axle misalignment, dangerous handling instability, and immediate MOT test failure. Kia dealers initiated service campaigns to inspect and wax-treat rear subframes, but neglected vehicles frequently require full subframe replacement.

On second-generation all-wheel-drive Sorento XM models (particularly the 2.2 CRDi automatic), the splined coupling between the transmission differential and the power transfer unit (PTU / transfer case) suffers from fretting corrosion and spline stripping. Uneven tyre wear between the front and rear axles causes the electronic AWD system to detect false wheel slip, continuously loading the coupling splines. Once the metal teeth strip, the rear axle loses drive, resulting in violent shudder at motorway speeds, clunking during low-speed turns, and total loss of AWD traction.