2015 Vauxhall Corsa 1.4L Petrol · FM64 EVR

The vehicle is currently roadworthy, but the maintenance history reveals a reactive approach to repairs rather than preventative care. While it passed its test in January 2026 at 79,319 miles, this followed a failure just two miles prior. This trend suggests that the owner only addresses mechanical faults when forced by the MOT tester. The recurring nature of brake wear and structural corrosion across the last three years indicates a stable but deteriorating condition where components are allowed to run until they reach the point of failure. At 11 years old with 79,319 miles, the car averages approximately 7,200 miles per year, which is consistent with typical UK usage for a small city car. The mileage progression shows steady annual use, with roughly 3,600 miles covered between the 2024 and 2025 tests, and another 3,500 miles before the January 2026 inspection. This consistent usage generally benefits the drivetrain and seals, though the record shows specific neglect of the peripheral suspension and braking components. A buyer must conduct a close inspection of the front sub-frame, which has been flagged for corrosion since at least 2024. Although the tester noted it was not yet seriously weakened, surface rust on structural members in this environment often accelerates into deep perforation. The braking system also shows a history of concern; the offside front brake disc progressed from being merely pitted in 2025 to significantly and obviously worn by early 2026. The rear brakes were also noted as imbalanced during the most recent failure, suggesting the calipers or adjustment mechanisms are beginning to seize. The suspension requires close monitoring, specifically regarding the coil springs. A fractured nearside front spring was recorded in 2024 alongside corrosion on both rear springs. Any prospective buyer should check for signs of further sagging or further cracking in these components. Additionally, the repeated failure to address a malfunctioning tyre pressure monitoring system and insufficient washer fluid in 2026 indicates that basic consumables and safety sensors are frequently overlooked until they fail inspection.