2015 Audi A3 SE Technik TDI S-A 2.0L Heavy oil · FN65 UDT

The most recent MOT test conducted on 30 April 2026 resulted in a pass with no defects recorded. Looking at the broader history, the maintenance trend for this vehicle is highly stable and positive. The absence of failures or advisories over the last four years indicates a vehicle that is likely well-maintained, with the only recorded wear items appearing as minor consumable advisories regarding brake pads, fluid levels, and tyre tread in 2021, all of which have since been resolved. With a recorded mileage of 76,668 miles over an eleven year period, the vehicle has averaged approximately 6,970 miles per annum. This represents a balanced usage profile that is typical for its age. Such mileage suggests that the drivetrain and interior have not been subjected to excessive wear, nor has the vehicle suffered from the stagnation issues often found in very low-mileage examples, such as perished seals or seized brake calipers. Given the exceptionally clean MOT record, the prospective buyer should focus on age-related degradation that may not be captured during a standard test. It is essential to inspect the tyre sidewalls for signs of perishing or fine cracking, as rubber degrades over time regardless of tread depth. The 12V battery health should be verified, as Audi electrical systems are sensitive to voltage drops. Furthermore, check the brake discs for surface corrosion or evidence of binding, and ensure the brake fluid has been replaced according to the manufacturer's time-based intervals to prevent moisture contamination. Finally, a thorough review of the service history is required to verify that calendar-based maintenance has been performed. Specifically, check for the replacement of the timing belt and water pump, as these are critical items for a vehicle of this age and mileage. During a test drive, listen for any knocks or clunks from the suspension bushes and coil springs, which can fatigue over a decade of use. Confirming that the oil and coolant are clean and free of contamination will provide the final assurance of the vehicle's long-term mechanical integrity.