2015 Ford Focus 2.0L Petrol · FN65 VVB

This Ford Focus demonstrates a consistent record of roadworthiness, characterized by a series of clean passes including the most recent inspection on 12 September 2025. While the history is largely devoid of defects, a notable failure in September 2023 highlighted critical tyre wear and suspension degradation, though these issues were rectified to allow a pass on the same day. The subsequent two years of defect-free testing indicate a stable mechanical condition with no recurring faults. With 83,973 recorded miles over an eleven-year period, the vehicle has averaged approximately 7,634 miles per year. This represents a typical usage profile for a car of this age, suggesting a balanced distribution of driving environments. Mechanically, this mileage level means that while the drivetrain is well within its expected lifespan, the vehicle is entering a phase where wear-and-tear components such as suspension bushings and brake consumables typically require closer monitoring. Given the previous flags regarding splitting rear anti-roll bar linkage pins and bushes, a test drive should focus on the rear axle stability. Listen for knocking or clunking sounds when traversing speed bumps or during sharp low-speed manoeuvres, as worn linkages often manifest as audible pops or a slight instability in the rear end. Ensure the steering feels centered and precise, as the previous inner-edge tyre wear on the offside front suggests a potential alignment issue that may have been corrected but warrants verification. Inspect the current condition of the tyres, specifically looking for uneven wear patterns on the inner shoulders of the front tyres, which would indicate persisting tracking or camber problems. Check the operation of the windscreen wipers to ensure they clear the glass without streaking, following the minor failure recorded in 2023. While the most recent tests were clean, the history of suspension bush splitting suggests that a physical inspection of all rubber components in the chassis for perishing or cracking is advisable.