2019 Toyota Yaris 1.5L Petrol · FP68 HRX

The 2019 Toyota Yaris has demonstrated consistent roadworthiness through five consecutive MOT tests, all passing without any recorded defects. The most recent inspection on 2025-09-01 at 41,807 miles confirms the vehicle remains compliant with current UK standards, with no advisories or failings to suggest latent mechanical issues. This stability indicates the vehicle has been maintained at a basic level, though the absence of any faults does not preclude wear that would only manifest under closer inspection. Buyers should note that the lack of advisories in prior tests does not equate to proactive servicing—only that the vehicle passed the minimum legal thresholds each time. The recorded mileage pattern reveals an unusually low annual average of approximately 5,972 miles, which is well below the typical UK usage for a vehicle of this age. The largest gap occurs between the 2021-12-06 test at 24,852 miles and the 2022-09-12 test at 30,592 miles—a 5,740-mile increase over nine months, suggesting either a period of infrequent use or a single owner accumulating significant mileage before resale. The subsequent years show far slower accumulation, with only 1,675 miles between 2022 and 2023, and 1,731 miles between 2023 and 2024. This irregularity implies the vehicle may have spent extended periods stationary, potentially accelerating wear on components like suspension bushes, coil springs, and brake calipers due to lack of movement. Given the clean MOT history, the primary focus for an in-person inspection should centre on the suspension and steering components, which are prone to degradation when a vehicle remains static for prolonged periods. Check for perished or cracked rubber bushes on the control arms, sway bars, and subframe mounts, as well as excessive play in the steering rack. The brakes, though not flagged in tests, warrant scrutiny for uneven wear on discs or pads, particularly if the vehicle was moved infrequently, as this can lead to binding calipers or corrosion. Examine the underbody for signs of corrosion, especially around the wheel arches and sills, as moisture accumulation during storage can accelerate rust. Finally, verify the condition of the exhaust system for leaks or damage, as this is another area where prolonged inactivity can cause deterioration.