1989 Daimler Double SIX 5.3L Petrol · G934 MEP
1989 Daimler Double SIX (5.3L, petrol). First registered 15 Aug 1989. Recorded mileage 89,310 miles. MOT valid until 03 Feb 2027.
- Make & Model
- DAIMLER DOUBLE SIX
- Year / Origin
- 1989 · Maidstone
- Safety Recall
- Unknown
- MOT Status
- Valid until 03 Feb 2027
- Road Tax
- —
- Recorded Mileage
- 89,310 mi
- ULEZ Compliance
- Check Required (Pre-Euro 4 Petrol)
- Fuel & Engine
- Petrol · 5.3L
- Reliability Guide
- Common Faults
Thinking of buying this vehicle? Free MOT and tax checks do not cover legal ownership. If outstanding finance exists, finance companies have legal right to repossess without compensation.
G934 MEP Key Findings
- 5 MOT tests recorded
- Latest MOT passed on 04/02/2026
- 89,310 miles recorded at latest MOT
- 2 historical MOT failures
- 2 defects noted at the latest MOT
- Recurring windscreen items (6 mentions)
Derived directly from the recorded DVSA and DVLA data shown on this page.
G934 MEP MOT History
Interpretation generated from the recorded test data above — not an official DVSA statement and not a substitute for an independent inspection.
5 MOT tests are recorded for this 1989 Daimler Double Six (G934 MEP) between April 2022 and February 2026.
The record contains 3 passes and 2 failures.
The most recent test on 04 February 2026 was a pass, although the earlier record includes 2 failures that buyers may want to investigate.
Across all tests, the most frequently flagged areas are: Windscreen (6 issues), Suspension (4 issues), Tyres (3 issues), Bodywork (3 issues), Brakes (3 issues). Repeated mentions in one area can indicate an ongoing pattern worth checking in person.
In total 11 advisory notices are recorded. Advisories flag items that passed but may need attention before the next test; they are not evidence of how well the vehicle has been serviced.
Recorded failure items include: “Nearside Rear Exhaust silencer insecure (8.1.1 (b) (i))”; “Battery insecure and likely to fall from carrier (4.13 (a) (ii))”; “Parking brake efficiency below requirements (1.4.2 (a) (i))”.
G934 MEP Mileage History
- 27/04/202286,875 mi
- 20/02/202488,995 mi+2,120 mi
- 01/08/202489,004 mi+9 mi
- 13/08/202489,218 mi+214 mi
- 04/02/202689,310 mi+92 mi
Average of roughly 645 miles per year across 5 recorded odometer readings.
Technical Specifications
Core Specifications
Identification & Status
Dimensions & Weights
Diagnostic & Valuation Intelligence
Estimate current market value
Generate an instant valuation benchmark based on live market listings, vehicle mileage, and recent dealer auction figures.
Known faults for Daimler Daimler Double Six
Our database tracks 4 specific mechanical faults and recurring failure patterns identified across UK MOT testing stations for this generation.
MOT Roadworthiness: Average
This rating reflects historical MOT pass rates and recurring advisory wear patterns from official DVSA test logs. Note that roadworthiness does not verify outstanding finance, insurance write-offs, or stolen records.
Verify lender finance agreements, insurance write-offs, police stolen registers, and mileage rollback.
Common Problems: DAIMLER DOUBLE SIX
Known issues reported by owners and MOT testers.
- V12 Engine Valley Fuel Rail Hose Degradation and Engine Bay Fire Risk(Serious)
The 5.3-litre and 6.0-litre V12 engines generate intense under-bonnet heat soak, particularly in the central valley where the fuel injection rail and short rubber injector feed hoses sit. Over time, heat cycles harden the rubber hoses, causing micro-cracking and loss of clamp tension. Modern ethanol-blended UK fuels (E5/E10) accelerate this embrittlement, allowing high-pressure fuel to spray or seep directly onto the distributor, HT leads, and hot exhaust manifolds, causing catastrophic under-bonnet fires. Preventative maintenance requires renewing all fuel rail hoses and injector link pipes with ethanol-rated synthetic hoses (such as Gates Barricade) every five to seven years.
- V12 Cooling System Silt Accumulation, Radiator Furring and Dropped Valve Seats(Serious)
The Jaguar all-aluminium V12 requires meticulous cooling maintenance due to its massive heat output and 20 individual coolant hoses. Neglected coolant changes allow mineral silt and corrosion sediment to clog the lower tubes of the cross-flow radiator and rear cylinder water passages. When localized overheating occurs, the aluminium cylinder head expands faster than the pressed-in steel valve seat inserts. Once press-fit tolerance is lost during extreme heat cycling, a valve seat insert loosens and drops into the combustion chamber, destroying the piston and bending valves. Remedying dropped seats requires an engine-out rebuild and peening or staking replacement inserts.
- Magneti Marelli and Lucas Ignition Amplifier / Distributor Rotor Breakdown(Serious)
Late Daimler Double Six models utilise a Magneti Marelli dual-coil digital ignition system, while earlier cars feature Lucas OPUS or Constant Energy systems. On Marelli-equipped models, high secondary ignition resistance from aged spark plugs or degraded HT leads causes internal electrical arcing through the distributor rotor body directly to the distributor drive shaft. This burns a pinhole through the rotor, killing spark to an entire six-cylinder bank. Because the fuel injectors continue spraying fuel into the dead cylinders, raw petrol floods into the catalytic converter, causing it to overheat, glow red-hot, and ignite underbody fires. Regular rotor and cap renewal is mandatory.
- Inboard Rear Brake Caliper Heat Seizure and Differential Output Seal Leaks(Moderate)
On Series 1, 2, and 3 Double Six saloons, the independent rear suspension mounts the brake calipers and discs inboard against the Salisbury differential casing. The intense radiant heat generated by the heavy V12 powertrain and exhaust pipes bakes the caliper piston seals and differential output shaft seals. Hardened diff seals allow hypoid gear oil to leak directly onto the inboard brake discs and pads, drastically reducing stopping power. Concurrently, caliper pistons seize in their bores from heat and moisture accumulation, causing severe brake drag. Rectifying the assembly requires lowering the complete rear axle subframe.
Similar Vehicles
Similar Vehicles Checked Recently
Plate Neighbors
Batch Registration Neighbors (G934 Series)
Vehicles registered in the same regional DVLA batch as G934MEP.
LAND ROVER
DEFENDER
PEUGEOT
205
BMW
K1
MAZDA
MX-5
SUZUKI
GSXR750
BMW
K1
YAMAHA
VMAX
PORSCHE
944
PEUGEOT
205
NISSAN
300 ZX
PIAGGIO
VESPA
VOLKSWAGEN
SCIROCCO
DAIMLER DOUBLE SIX Model Intelligence & Reliability
Verified MOT failure trends, buying advice, and technical directory specifications.
Owner-reported defects, recurring MOT failure points, and estimated repair costs.
Browse production generations, registration statistics, and trim variants.
Historical MOT pass rates and DVLA records for 1989 model year cars.
- V12 Engine Valley Fuel Rail Hose Degradation and Engine Bay Fire RiskSerious
The 5.3-litre and 6.0-litre V12 engines generate intense under-bonnet heat soak, particularly in the central valley where the fuel injection rail and short rubber injector feed hoses sit. Over time, heat cycles harden the rubber hoses, causing micro-cracking and loss of clamp tension. Modern ethanol-blended UK fuels (E5/E10) accelerate this embrittlement, allowing high-pressure fuel to spray or seep directly onto the distributor, HT leads, and hot exhaust manifolds, causing catastrophic under-bonnet fires. Preventative maintenance requires renewing all fuel rail hoses and injector link pipes with ethanol-rated synthetic hoses (such as Gates Barricade) every five to seven years.
- V12 Cooling System Silt Accumulation, Radiator Furring and Dropped Valve SeatsSerious
The Jaguar all-aluminium V12 requires meticulous cooling maintenance due to its massive heat output and 20 individual coolant hoses. Neglected coolant changes allow mineral silt and corrosion sediment to clog the lower tubes of the cross-flow radiator and rear cylinder water passages. When localized overheating occurs, the aluminium cylinder head expands faster than the pressed-in steel valve seat inserts. Once press-fit tolerance is lost during extreme heat cycling, a valve seat insert loosens and drops into the combustion chamber, destroying the piston and bending valves. Remedying dropped seats requires an engine-out rebuild and peening or staking replacement inserts.
- Magneti Marelli and Lucas Ignition Amplifier / Distributor Rotor BreakdownSerious
Late Daimler Double Six models utilise a Magneti Marelli dual-coil digital ignition system, while earlier cars feature Lucas OPUS or Constant Energy systems. On Marelli-equipped models, high secondary ignition resistance from aged spark plugs or degraded HT leads causes internal electrical arcing through the distributor rotor body directly to the distributor drive shaft. This burns a pinhole through the rotor, killing spark to an entire six-cylinder bank. Because the fuel injectors continue spraying fuel into the dead cylinders, raw petrol floods into the catalytic converter, causing it to overheat, glow red-hot, and ignite underbody fires. Regular rotor and cap renewal is mandatory.
Recently Checked UK Vehicles
Live vehicle history checks and MOT records recently queried by UK car buyers.