2022 Ford Mondeo 2.0L Hybrid electric (clean) · GD71 YHV

Consistent roadworthiness has defined this vehicle throughout its testing history, with the most recent MOT on 12 December 2025 resulting in a pass with no defects recorded. This clean performance follows a series of consecutive trouble-free examinations conducted in late 2024 and late 2025, establishing a pattern of compliance that suggests the primary safety-critical systems have remained within acceptable tolerances during the inspection windows. There are no historical advisories or failure points documented in the available record, indicating that the vehicle has not required remedial work to meet statutory standards during its initial years of operation. Accumulating 51,073 miles over a four-year period equates to an annual usage rate of approximately 12,768 miles, which sits above the typical average for a passenger vehicle of this age. This consistent, higher-than-average mileage suggests the car has spent a significant portion of its life in active service, likely covering longer motorway or arterial road journeys rather than short, stop-start urban cycles. While this usage profile often places less strain on the clutch and brake components compared to city driving, it necessitates a thorough inspection of high-wear drivetrain elements and suspension bushings that are subjected to prolonged kinetic stress. Prospective buyers should focus their test drive on evaluating the condition of the suspension and steering geometry, as the higher mileage will have placed cumulative stress on the track rod ends, anti-roll bar links, and wishbone bushes. Listen specifically for any metallic knocking or clunking sounds when traversing uneven road surfaces or speed humps, as these are primary indicators of wear in the suspension linkages. Additionally, assess the steering for any vagueness or pulling to one side, which could suggest that the wheel alignment has been compromised by the vehicle's sustained usage. Given the absence of recorded advisories regarding the braking system, verify the current state of the discs and pads during the inspection, as these are high-consumption items that may be nearing the end of their service life given the recorded mileage. Apply the brakes firmly from moderate speeds to check for any pedal pulsation or judder, which could indicate warped discs or uneven pad wear. Furthermore, perform a cold start to monitor for any unusual engine vibrations or hesitation, ensuring that the drivetrain remains responsive and that the transmission shifts smoothly without any audible grinding or delayed engagement.