2021 Audi E-Tron GT Quattro Electric · GE03 GET

A consistent record of clean roadworthiness defines this vehicle, with three consecutive annual inspections showing no defects or advisories, including the most recent test on 10 July 2026. This pattern of passing without any recorded failures or even minor advisories suggests a stable mechanical history regarding the components subject to MOT inspection, such as lighting, steering, braking systems, and structural integrity. The recorded mileage of 27,288 miles over approximately five years indicates a low-usage profile, averaging roughly 5,458 miles per year. While this lower annual accumulation typically results in less wear on consumable items like brake pads and tyres, it is important to consider that vehicles with lower mileage may have spent more time stationary. In an electric vehicle context, this usage pattern means that while mechanical wear on the drivetrain may be minimal, the vehicle has not been subjected to the high-frequency cycles often seen in high-mileage commuter cars. Since there are no recorded advisories for suspension bushes, steering linkages, or brake pipes, a test drive should focus on confirming the absence of any subtle mechanical deviations that may not have triggered an MOT failure. Listen for any irregular knocks or knocks from the suspension when traversing uneven surfaces, which could indicate premature wear in the control arms or bushings. Pay close attention to the steering response for any pulling or vagueness, and monitor the brake pedal for any unusual vibration or judder that might suggest uneven pad or disc wear despite the low mileage. Given the lack of reported leaks or emissions issues, the inspection should also verify the absence of any fluid weeping from the suspension or drivetrain components. Although the MOT record is clear of any reported corrosion or structural defects, a physical inspection of the underbody is advisable to ensure that the lack of frequent road use has not allowed for any localized environmental degradation. Focus on the integrity of the suspension mounts and any exposed metal components to ensure they remain in the condition reflected by the clean testing history.