2016 Vauxhall Vivaro 1.6L Diesel · GF66 SFU

A consistent track record of roadworthiness defines this vehicle, characterized by a complete absence of recorded advisories or defects throughout its recent testing history. This stability is evidenced by the pass achieved on 16 December 2025, following a brief failure a week prior that was resolved without leaving a lasting defect record. The overall trend suggests a vehicle that has been maintained to a standard that consistently meets DVSA requirements without recurring mechanical issues. The recorded mileage of 128,853 miles represents a high rate of annual usage, averaging approximately 12,885 miles per year over a decade of service. Such high accumulation typically accelerates the wear of critical consumables and structural components. For a commercial vehicle of this age and mileage, this usage pattern places significant demand on the drivetrain, engine internals, and the overall integrity of the suspension system. Given the lack of specific MOT failures, the physical inspection should focus on the natural degradation associated with high-mileage commercial use. During the test drive, pay close attention to the suspension bushes and coil springs for any knocking or instability when traversing uneven surfaces. Check for any steering pull or vibration at motorway speeds, which would indicate wear in the steering rack or wheel bearings that may not yet have reached a failure threshold for testing. Further attention should be directed toward the drivetrain and braking efficiency. Listen for any unusual noises from the gearbox or signs of clutch slip under load, as these are common wear points for high-mileage units. While the MOT records show no binding calipers or worn discs, a tactile check of the brake pedal for judder or excessive travel is recommended to ensure the braking system remains responsive under heavy load.