2021 Peugeot Partner Professional Prem Bhdi 1.5L Diesel · GF71 RTX

The vehicle most recently passed its MOT on 21 October 2025, following a similar positive result in October 2024. Both tests were achieved with only minor defects, specifically relating to an inoperative registration plate lamp and minor windscreen damage. This indicates a stable maintenance trend, suggesting that the vehicle has been consistently kept in a roadworthy condition without any evidence of recurring mechanical failure or structural deterioration. With a recorded mileage of 75,289 miles over approximately five years, this vehicle has averaged roughly 15,058 miles per annum. This is considered high usage for its age, which is typical for a commercial vehicle. Such mileage accumulation suggests accelerated wear on primary consumables and chassis components. Prospective buyers should anticipate that the vehicle is closer to major service intervals and the natural end-of-life for various wear items compared to a lower-mileage equivalent. Given the clean MOT record, the physical inspection should focus on high-mileage wear rather than specific recorded defects. During a test drive, listen for clunks or knocks from the suspension bushes and coil springs, which often degrade under heavy commercial loads. Pay close attention to the steering precision and check for any shuddering under braking, which could indicate warped brake discs or binding calipers. Inspect the tyre treads for uneven wear patterns, as this often points to misalignment or worn suspension components that have not yet triggered an MOT failure. It is essential to verify the full service history, ensuring that oil and filter changes have been performed at the correct intervals to protect the BHDI engine's longevity. Check the condition of the auxiliary belt and inspect the underbody for any signs of fluid leaks or surface corrosion. Finally, examine the interior and load area for excessive wear, as the physical condition of the cabin often reflects the intensity of the vehicle's operational history and how it was treated by previous operators.