2020 Volvo XC40 R-Design B4 Mhev Auto 2.0L Hybrid electric · GK03 KAT

Recurring tyre wear on both front axles presents the primary mechanical concern for this vehicle, as evidenced by consecutive advisories for tyres worn close to the legal limit and worn on the edges during the 2024 and 2025 inspections. While the vehicle successfully passed its most recent MOT on 27 October 2025, the persistence of these advisories suggests a consistent pattern of uneven tread depletion. This trend often points toward a need for more frequent wheel alignment or potential issues with suspension geometry that have not been fully rectified despite the passing grades. The recorded mileage of 34,981 miles against a six-year age profile indicates a low-use pattern, averaging approximately 5,830 miles per year. This level of annual accumulation is significantly below the UK average, which generally implies less mechanical fatigue on high-wear components such as the engine, gearbox, and drivetrain. However, such low mileage can sometimes result in less frequent operation of certain systems, and in this specific case, the recurring tyre advisories suggest that the limited driving may be concentrated in a manner that does not adequately address alignment or load distribution. A prospective buyer should focus their physical inspection on the front suspension and steering assembly to identify the root cause of the uneven tyre wear. During a test drive, pay close attention to any steering pull to one side or a wandering sensation at motorway speeds, which would indicate misaligned geometry. Listen closely for any knocking or clunking noises when navigating uneven surfaces or speed bumps, as these could signal worn suspension bushes, ball joints, or worn control arm components that are contributing to the irregular tyre contact patches. Additionally, verify the condition of the front tyres themselves, as the advisories indicate they are nearing the legal limit. Given the pattern of edge wear, it is advisable to check the camber and toe settings by observing if the tread depth is significantly lower on the inner or outer edges compared to the centre. Ensuring that a professional four-wheel alignment is performed alongside any tyre replacements will be essential to prevent the immediate recurrence of these advisories and to ensure the vehicle's handling remains stable and predictable.