2010 Ford Fusion 1.4L Diesel · GK10 WWN
2010 Ford Fusion (1.4L, diesel). First registered 26 Mar 2010. MOT expired on 27 Apr 2026.
- Make & Model
- FORD FUSION
- Year / Origin
- 2010 · Maidstone
- Safety Recall
- Unknown
- MOT Status
- Expired on 27 Apr 2026
- Road Tax
- —
- Recorded Mileage
- —
- ULEZ Compliance
- Non-Compliant (Pre-Euro 6 Diesel)
- Fuel & Engine
- Diesel · 1.4L
- Reliability Guide
- Common Faults
Thinking of buying this vehicle? Free MOT and tax checks do not cover legal ownership. If outstanding finance exists, finance companies have legal right to repossess without compensation.
GK10 WWN Key Findings
- 4 MOT tests recorded
- Latest MOT passed on 24/04/2025
- 0 miles recorded at latest MOT
- No defects recorded at the latest MOT
Derived directly from the recorded DVSA and DVLA data shown on this page.
GK10 WWN MOT History
Interpretation generated from the recorded test data above — not an official DVSA statement and not a substitute for an independent inspection.
4 MOT tests are recorded for this 2010 Ford Fusion (GK10 WWN) between June 2022 and April 2025.
The record contains 4 passes and 0 failures.
No failures or advisories appear anywhere in the recorded tests, so the documented MOT record is relatively clean.
GK10 WWN Mileage History
- 10/06/202252,699 mi
- 28/04/202354,794 mi+2,095 mi
- 27/04/20240 mi-54,794 mi
- 24/04/20250 mi
Average of roughly -18,351 miles per year across 4 recorded odometer readings.
Recorded mileage decreased between one or more tests — a potential clocking indicator worth verifying before purchase.
Technical Specifications
Core Specifications
Identification & Status
Dimensions & Weights
Diagnostic & Valuation Intelligence
Estimate current market value
Generate an instant valuation benchmark based on live market listings, vehicle mileage, and recent dealer auction figures.
Known faults for Ford Ford Fusion (Europe)
Our database tracks 3 specific mechanical faults and recurring failure patterns identified across UK MOT testing stations for this generation.
MOT Roadworthiness: Average
This rating reflects historical MOT pass rates and recurring advisory wear patterns from official DVSA test logs. Note that roadworthiness does not verify outstanding finance, insurance write-offs, or stolen records.
Verify lender finance agreements, insurance write-offs, police stolen registers, and mileage rollback.
Common Problems: FORD FUSION
Known issues reported by owners and MOT testers.
- Pollen Filter Housing Bulkhead Water Ingress(Moderate)
The cabin pollen filter on the Ford Fusion is located within the heater bulkhead beneath the windscreen scuttle panel. Over time, the factory foam weather-seal on the pollen filter housing cover deteriorates, dries out, and degrades from exposure to heat and moisture. Rainwater running off the windscreen bypasses the degraded seal and flows directly into the passenger footwell, soaking sound-deadening insulation and risking corrosion to the interior wiring harness and fusebox.
- 1.4 TDCi Common-Rail Fuel Injector Copper Washer Leak(Moderate)
On 1.4-litre Duratorq TDCi diesel engines, the copper crush washers sealing the base of the fuel injectors against the cylinder head fire face can harden, erode, and fail. High-pressure combustion gases blow past the failed copper seal, venting hot diesel soot, hydrocarbons, and unburnt fuel into the injector wells. Over time, this baked soot solidifies into a hard, tar-like black carbon crust known as black death, damaging the injector body, creating exhaust fumes in the cabin, and making injector removal difficult.
- Durashift EST Automated Manual Transmission Actuator Fault(Serious)
The optional Durashift Electronic Shift Transmission (EST) utilizes an automated mechanical clutch and electro-mechanical gear selector actuators mounted to a standard manual gearbox. Over time, internal electric actuator motors suffer brush wear, moisture ingress, or solder joint failure on the integrated control module. When the transmission control unit loses position calibration or cannot actuate the clutch, the system enters fail-safe mode, flashing a transmission warning on the instrument cluster and preventing engine cranking.
Similar Vehicles
Similar Vehicles Checked Recently
Plate Neighbors
Batch Registration Neighbors (GK10 Series)
Vehicles registered in the same regional DVLA batch as GK10WWN.
VOLKSWAGEN
PASSAT SE BUSINESS TDI BMT S-A
VOLVO
V50
VOLVO
XC60
VOLVO
XC90
VOLVO
XC60
VOLVO
XC90
VOLVO
XC60
BMW
525
VOLVO
V50
VOLVO
XC60
VAUXHALL
ASTRA
VOLVO
V50
FORD FUSION Model Intelligence & Reliability
Verified MOT failure trends, buying advice, and technical directory specifications.
Owner-reported defects, recurring MOT failure points, and estimated repair costs.
Browse production generations, registration statistics, and trim variants.
Historical MOT pass rates and DVLA records for 2010 model year cars.
- Pollen Filter Housing Bulkhead Water IngressModerate
The cabin pollen filter on the Ford Fusion is located within the heater bulkhead beneath the windscreen scuttle panel. Over time, the factory foam weather-seal on the pollen filter housing cover deteriorates, dries out, and degrades from exposure to heat and moisture. Rainwater running off the windscreen bypasses the degraded seal and flows directly into the passenger footwell, soaking sound-deadening insulation and risking corrosion to the interior wiring harness and fusebox.
- 1.4 TDCi Common-Rail Fuel Injector Copper Washer LeakModerate
On 1.4-litre Duratorq TDCi diesel engines, the copper crush washers sealing the base of the fuel injectors against the cylinder head fire face can harden, erode, and fail. High-pressure combustion gases blow past the failed copper seal, venting hot diesel soot, hydrocarbons, and unburnt fuel into the injector wells. Over time, this baked soot solidifies into a hard, tar-like black carbon crust known as black death, damaging the injector body, creating exhaust fumes in the cabin, and making injector removal difficult.
- Durashift EST Automated Manual Transmission Actuator FaultSerious
The optional Durashift Electronic Shift Transmission (EST) utilizes an automated mechanical clutch and electro-mechanical gear selector actuators mounted to a standard manual gearbox. Over time, internal electric actuator motors suffer brush wear, moisture ingress, or solder joint failure on the integrated control module. When the transmission control unit loses position calibration or cannot actuate the clutch, the system enters fail-safe mode, flashing a transmission warning on the instrument cluster and preventing engine cranking.
Regional DVLA Registration Directory
Vehicles and registration batches issued by regional DVLA offices across the UK.
Recently Checked UK Vehicles
Live vehicle history checks and MOT records recently queried by UK car buyers.