2004 Vauxhall Zafira 1.6L Petrol · GL54 KFF

The vehicle currently stands at roadworthiness 11, with the most recent MOT test on 2026-05-13 at 127,267 miles. This test passed, indicating the vehicle is not currently in a failing condition, though specific faults are noted in the 2022-12-05 test. The maintenance history reveals a clear pattern of deterioration, particularly concerning the rear suspension and braking systems. Failing twice on the tyre tread in 2020 suggests that basic upkeep was likely skipped, leading to accelerated wear on the suspension components and brakes. The 2026-05-13 test flagged a corroded front brake pipe and a corroded rear coil spring, which may indicate that the vehicle has not been serviced regularly enough to maintain these structures. Regarding the mileage pattern, the vehicle is approximately 22 years old with 127,267 miles recorded. This is low for its age, suggesting either lighter use or long periods of standing, which can mask wear on consumables. However, the data shows rapid mileage accumulation between 2020 and 2022, where the vehicle failed twice on the front brake pad in 2020 and again in 2022. This gap in record suggests that the vehicle may have been driven for extended periods, potentially leading to premature wear on the brake pads and discs, which are critical components for safety. A buyer should inspect the vehicle in person to verify the condition of the rear suspension, brake discs, and brake pads. The 2022-12-05 test flagged a significantly worn rear brake disc and a thin rear brake pad touching the disc, indicating structural integrity issues that require immediate attention. Additionally, the 2020-12-07 test showed that the front brake pad was wearing thin, which may have contributed to the brake disc wear. The 2026-05-13 test further flagged a corroded front brake pipe, which is a significant risk for braking performance. If these faults are confirmed, the vehicle should be assessed for structural integrity, specifically checking for rust in the brake and suspension areas, and ensuring that the brake discs and pads are in good condition for safe operation.