2009 Toyota Yaris 1.3L Petrol · H11 GAJ

An exceptionally unbroken sequence of eight consecutive clear MOT certificates, culminating in a pass on 15 July 2026 with zero defects recorded, defines the recent roadworthiness profile of this 2009 Toyota Yaris. Spanning from 2019 through 2026, every annual examination concluded without a single failure or advisory note logged by testers. This spotless run demonstrates that the vehicle has consistently met the minimum statutory standards for emissions, structural integrity, lighting, and braking efficiency at the time of each yearly test. The overall mileage stands at an extraordinarily low 9,453 miles after approximately seventeen years on the road, equating to an average annual accumulation of roughly 556 miles. Such minimal usage means the car has spent the vast majority of its life stationary, with the DVSA testing history confirming a consistent pattern of low-mileage completion year after year. While this lack of distance travelled spares the drivetrain from high-wear mileage, extended periods of inactivity can place specific physical demands on pliable materials and peripheral hardware that do not naturally register on a standard MOT test sheet. On a physical inspection and test drive, the buyer should pay close attention to rubber components, suspension bushings, and flexible hoses, as long-term stationary periods can cause these materials to stiffen, perish, or develop surface cracking despite passing the statutory safety check. Listen intently over rough road surfaces for any knocking or creaking from the wishbone bushes, drop links, and anti-roll bar mountings, and check that the coil springs show no signs of premature fatigue or localized corrosion on their lower seating coils. Additionally, the braking system warrants a thorough physical assessment during a road test to verify that the calipers, sliders, and handbrake mechanism are operating freely without binding, which can sometimes occur when vehicles are driven infrequently and left parked for long stretches. Ensure the brake pedal feels firm with no excessive travel or judder, and verify that all engine ancillaries, fluid levels, and auxiliary belts operate smoothly without unusual noises upon cold startup.