2022 Vauxhall Grandland Elite Turbo 1.2L Petrol · HN72 WWF

A completely clean MOT record to date, with the sole test on 16 October 2025 recorded as a pass and no defects logged, indicates that the vehicle has not presented any roadworthiness issues that required remedial action under the DVSA inspection regime. The absence of advisories or failures across the available history suggests that, at least at the time of testing, the principal safety‑critical systems – brakes, steering, suspension, lights and emissions – were deemed compliant. At four years old the odometer reads 19 494 miles, giving an average of roughly 4 874 miles per year. This is well below the typical annual accumulation for a family SUV and points to relatively light usage or periods of inactivity. Low mileage reduces the wear rate on consumables such as brake pads, clutch discs and tyre tread, but prolonged standing can allow seals to dry out, battery electrolyte to stratify and rubber components to harden. Consequently, while the wear budget is likely modest, the vehicle should be examined for the subtle effects of age rather than mileage alone. When conducting a pre‑purchase inspection, focus on the condition of the suspension bushings, ball joints and anti‑roll bar links, listening for clunks or excessive play over bumps. Verify that the steering feels free of binding and that the rack‑and‑pinion returns smoothly after a full lock. Test the brakes for consistent pedal feel, absence of pulsation and even pad wear; any grinding or a soft, spongy pedal could signal hidden wear despite the clean MOT. Inspect the under‑body for any signs of corrosion, particularly around the wheel arches and rear subframe, as rust can develop unnoticed during long stationary periods. Check the engine bay for oil leaks around the valve cover, oil filter housing and coolant hoses, and ensure the battery terminals are free of corrosion and the electrolyte level is appropriate. On the road, pay attention to any unusual vibrations through the steering wheel at higher speeds, which may reveal tyre imbalance or worn wheel bearings, and listen for rattles that could indicate loose interior trim or exhaust hangers. Confirm that the vehicle accelerates smoothly without hesitation, and that gear changes are crisp and without judder. A thorough diagnostic scan for stored fault codes, combined with a visual inspection of fluid levels and condition, will provide the most reliable picture of the car’s current mechanical state before committing to purchase.