2005 Ford Transit 2.4L Diesel · HX55 AFU

The most recent MOT history for this 2005 Ford Transit reveals a concerning pattern of repeated failures and near-misses in December 2023 and 2025, despite no defects being recorded on either occasion. The double test in December 2025—one pass, one fail—suggests either a rushed or inconsistent inspection process, though the lack of recorded issues implies the vehicle cleared all critical safety and emissions checks. The previous December 2023 failure, just four miles before passing, further raises questions about whether the tester overlooked minor but recurrent faults. Without specific defect details, the trend cannot be definitively attributed to worsening mechanical issues, but the frequency of retests indicates either administrative irregularities or a vehicle pushed close to its limits. The recorded mileage of 72,651 miles over 21 years equates to approximately 3,460 miles annually, a figure significantly lower than average for a commercial van of this age. The gap between tests—consistently around 12 months—suggests the vehicle has been regularly driven but not excessively so. The near-identical mileage between the 2023 pass and fail (70,349 vs. 70,344) implies the vehicle was not in active use during that period, potentially due to seasonal storage or reduced demand. While low mileage generally correlates with less wear on suspension bushes, coil springs, and drivetrain components, the lack of recorded advisories or defects in prior tests means no prior warnings of impending failures have been documented. Given the absence of specific defect details in the MOT record, an in-person inspection should prioritise components prone to fatigue or neglect in a vehicle of this age. Focus on the suspension system—particularly rear suspension bushes and coil springs—for signs of cracking or excessive play, as these are common failure points in vans of this era. The braking system warrants thorough examination, including rear brake binding (a recurring issue in older Transits) and the integrity of brake discs and calipers, especially if the vehicle was stored for extended periods. Structural corrosion, particularly around wheel arches, sills, and the subframe, should be inspected for hidden deterioration that could compromise structural integrity. Finally, verify the condition of the exhaust system for leaks or rusted-through sections, as emissions-related failures are often the first to appear in MOT tests. The lack of advisories in past tests does not guarantee these areas are sound, so visual and functional checks are essential.