2018 Toyota Yaris 1.5L Petrol · J2 GVA

The 2018 Toyota Yaris has maintained a clean MOT history with no defects recorded across five consecutive tests, most recently passing on 28 May 2025 at 25,495 miles. This suggests a stable roadworthiness trend with no evidence of recurring mechanical failures or advisory issues. The absence of advisories or failings over nearly three years indicates the vehicle has not experienced major component failures—such as suspension bush deterioration, binding brakes, or significant corrosion—that would typically escalate over time. However, the most recent test was conducted just over two years ago, meaning critical components like brakes, tyres, and suspension will now require thorough inspection to confirm they remain within safe operational limits. The recorded mileage of 25,495 miles over eight years—approximately 3,187 miles annually—is unusually low for a vehicle of this age, particularly given the Yaris’s typical usage patterns. This suggests either very light usage, prolonged periods of storage, or potential odometer manipulation, though the latter cannot be confirmed without further evidence. The consistent mileage increments between tests (around 1,600 miles per year) imply no sudden spikes that might indicate aggressive driving or neglect, but the extended gaps between MOTs—up to 12 months—could mean some maintenance tasks were deferred. Without service records, it is impossible to verify whether routine intervals, such as timing belt checks or fluid changes, were adhered to. Given the clean MOT history, a buyer should prioritise an in-person inspection of high-wear components that are not directly tested during an MOT. Focus on the condition of the brake discs and pads, particularly for uneven wear or glazing, as the tester did not flag any brake-related issues in prior tests. The suspension should be checked for worn or leaking dampers, as well as the integrity of coil springs and bushes, especially if the vehicle has spent extended periods stationary. Tyre tread depth and lateral wear patterns are critical, though the MOT’s lack of defects suggests they were within limits at the last test. Finally, examine the underbody for corrosion around wheel arches, sills, and exhaust systems, as rust can compromise structural integrity over time without being immediately obvious.