2020 Mercedes-Benz A 1.3L Petrol · JE66 DEV

This Mercedes-Benz A has maintained a consistent MOT pass record across all four tests, with no defects or advisories recorded since its last inspection on 22 October 2025. The vehicle’s most recent test, just nine months ago at 27,905 miles, confirms no mechanical or structural failings, suggesting the tester found no binding calipers, excessive suspension wear, or corrosion compromising structural integrity. The absence of advisories—even minor ones—implies previous owners addressed all non-critical issues promptly, though this does not preclude hidden wear from low mileage or prolonged storage. The pattern of flawless MOTs indicates a vehicle that has either been stored under controlled conditions or driven with minimal stress on high-wear components. The recorded mileage of 27,905 miles over six years—approximately 4,651 miles annually—is unusually low for a vehicle of this age, particularly given the Mercedes-Benz A’s typical usage patterns. The gaps between tests are regular, with roughly 12-month intervals between inspections, but the slow accumulation of miles raises questions about the vehicle’s storage conditions or usage history. For instance, the jump from 11,150 miles in February 2023 to 16,850 miles in February 2024 suggests a brief period of activity, yet the subsequent two years show minimal additional mileage. This could indicate extended periods off the road, which may accelerate degradation of fluids, seals, and suspension components if not properly maintained during storage. Given the lack of MOT defects, a buyer should prioritise an in-person inspection of suspension integrity, particularly the condition of coil springs, bushes, and shock absorbers, as low mileage does not guarantee these have remained unstressed. The brakes—though never failed—should be checked for uneven wear or binding calipers, as binding is often latent until significant wear occurs. Tyres, despite no MOT failures, warrant scrutiny for uneven tread depth or internal damage from prolonged static loading. Finally, the underbody and wheel arches should be examined for corrosion, especially if the vehicle has spent time in wet or coastal environments, as rust can compromise structural components without immediate MOT consequences. Fluid levels and condition—brakes, power steering, and engine oil—should also be verified, as they degrade over time even with minimal use.