2017 Peugeot Expert 1.6L Diesel · KS17 VLN

The vehicle's overall roadworthiness is assessed as good , provided the maintenance history is interpreted correctly. The most recent MOT test was conducted on 2025-06-03 at 70,374 miles, which was passed with no defects recorded. This indicates that the vehicle has maintained a consistent mechanical condition up to this point, suggesting that the maintenance trend is stable rather than worsening. The absence of defects in the September 2023 test further supports this conclusion, confirming that the vehicle has been in good mechanical condition for at least two years prior to the most recent inspection. The mileage pattern reflects a relatively clean driving history despite the vehicle's age. The vehicle has approximately 70,000 miles on a 9-year-old model, which is typical for its age and suggests that the drivetrain and suspension components have not experienced significant wear or damage. While the mileage is high, the absence of defects in the MOT records implies that the vehicle has been driven with a level of care that prevents the accumulation of faults. However, the gap between the 2025 and 2023 tests creates a potential blind spot for future maintenance, as the vehicle has not been inspected for issues since the 2023 test. Given the recent history, the buyer should inspect the vehicle for structural integrity and mechanical wear. The most critical areas to check are the suspension components, specifically the bushings and coil springs, and the braking system, including the binding calipers. The 2025 test at 70,374 miles was passed, but the 2024 test at 63,054 miles failed, which may indicate early wear in the suspension or brake systems that requires immediate attention. The 2022 test at 43,826 miles was also passed, but the 2023 test at 54,551 miles failed, suggesting that the vehicle has not been serviced for at least a year. A thorough inspection of the suspension and brakes is recommended before purchase to ensure the vehicle meets the required roadworthiness standards.