2022 BMW 220I M Sport Auto 2.0L Petrol · KT72 OLB

The most recent MOT test conducted on 29 August 2026 resulted in a pass with no defects recorded. This follows a clean pass in December 2025, establishing a highly stable and positive maintenance trend. The absence of any recorded advisories or failures suggests that the vehicle's essential safety components, including its lighting, braking systems, and structural integrity, have been consistently maintained to a standard that meets DVSA requirements. With a recorded mileage of 20,568 miles over approximately four years, the vehicle has covered an average of roughly 5,142 miles per annum. This is considered low usage for a BMW 220i, which typically implies less mechanical stress on the engine, transmission, and suspension assemblies. However, such low mileage can sometimes indicate that the vehicle has been subject to long periods of standing, which introduces different mechanical risks compared to a vehicle used for regular, high-frequency commuting. Given the clean MOT history and low mileage profile, your physical inspection should prioritise age-related degradation over wear-based components. Closely inspect the tyres for any signs of perishing, sidewall cracking, or uneven wear patterns that may result from the vehicle sitting stationary for extended periods. You should also check the brake discs for excessive corrosion or pitting and ensure that the brake calipers are not binding, which can happen when a vehicle is not regularly driven. During your test drive, pay close attention to the suspension for any clunks or knocks that might indicate dried or perished bushes, and listen for any unusual engine noise that could suggest fluid degradation. It is also critical to verify that the service history reflects time-based maintenance rather than strictly mileage-based intervals. Since fluids such as engine oil, brake fluid, and coolant degrade chemically over time, ensure that these have been changed according to the manufacturer's annual schedule. Furthermore, test the health of the 12V battery, as infrequent usage is a common cause of battery failure. Finally, check the condition of the drive belts and various rubber hoses to ensure they have not become brittle or cracked due to age, ensuring the vehicle remains reliable for long-term ownership.