2017 Honda Civic SR Vtec 1.0L Petrol · KXZ 4673

This Honda Civic SR VTEC has maintained a clean MOT history with no defects recorded across five consecutive tests, most recently passing on 31 March 2026 at 27,481 miles. The absence of advisories or failings suggests the vehicle has been subjected to consistent, if not rigorous, maintenance—though the lack of recorded defects does not preclude hidden wear or deferred servicing. The most recent test, just under four months ago, confirms the car remains within legal limits for emissions, brakes, suspension, and structural integrity. However, the prolonged gap since the last MOT (over three months) means some components—particularly tyres, brake pads, and fluid levels—may have experienced accelerated wear. Buyers should verify these were recently serviced, as even minor neglect can escalate into binding calipers or uneven tread depth. The recorded mileage of 27,481 miles over nine years—approximately 3,053 miles annually—indicates light usage, which typically correlates with reduced wear on high-stress parts like suspension bushes, coil springs, and drivetrain components. The most notable mileage jump occurred between the August 2021 (18,209 miles) and October 2022 (21,238 miles) tests, a 3,029-mile increase in under a year, though this remains within reasonable limits for a low-mileage vehicle. The consistency of passing without fail suggests the car has not been subjected to harsh conditions or prolonged storage, though the lack of pre-MOT servicing records means buyers cannot assume all service intervals were adhered to. The longest gap between tests was 13 months (February 2024 to October 2022), which, while not unusual, raises questions about whether intermediate checks were performed. Given the clean MOT record, the priority inspection areas should focus on components prone to deferred maintenance or environmental damage. The suspension—particularly rear bushes and coil springs—should be examined for cracking or excessive play, as these are often overlooked until failure. Brake discs and pads, despite no recorded issues, warrant close inspection for uneven wear or binding calipers, which could indicate past neglect. Tyre tread depth and lateral wear patterns must be verified, as the absence of advisories in prior tests could imply basic upkeep was skipped. Finally, the underbody and wheel arches should be scrutinised for corrosion, especially around the sills and rear subframe, as low mileage does not guarantee rust-free conditions. The engine bay fluids—brake, power steering, and coolant—should also be checked for contamination or low levels, as these are not routinely tested in MOTs.