2015 Vauxhall Insignia 2.0L Diesel · KY65 ADV

The most recent MOT test for the 2015 VAUXHALL INSIGNIA was completed on 2026-02-09 and resulted in a PASS. The inspection notes highlight several advisories that should be monitored closely during the vehicle's remaining service life. These include a binding issue in the offside rear service brake, which may manifest as a subtle shudder under braking, and a worn suspension arm pin or bush in the rear upper arms, potentially leading to increased play or uneven handling if not addressed. Additionally, the central exhaust has a minor leak, indicating possible exhaust gas flange 1 being bolt-sheared, which could affect emissions compliance and engine performance over time. These findings suggest a need for attention to braking dynamics, suspension integrity, and exhaust system health. The recorded mileage stands at 75,182 miles, which aligns with the vehicle's age of approximately 11 years. At roughly 6,835 miles per year, this usage rate is moderate but not exceptional, especially considering the vehicle has been driven for a significant duration. The mileage pattern suggests periods of lighter use interspersed with heavier periods, which can contribute to uneven wear on critical components such as the suspension, brakes, and drivetrain. It is advisable to inspect the tyres for cracking or perishing, as age and mileage often accelerate sidewall degradation and sidewall integrity loss. The battery health should also be verified, as older vehicles are more prone to electrical system fatigue. For buyers who have not had a recent MOT or have a clean record, the practical checks should focus on age-related wear indicators. Verify that the tyre sidewalls remain intact and free from perishing, especially on the perishing side. Pay close attention to the standing condition of the brakes, particularly the rear upper arms, where any binding or excessive movement could signal impending failure. Check the brake discs for corrosion or binding, which can affect stopping performance. Inspect the 12V battery for corrosion or reduced capacity, as this can impact electrical systems and lighting. Additionally, confirm that all service book stamps are present and that the vehicle has been serviced according to the manufacturer’s recommendations. These steps will help ensure the car remains roadworthy and safe for the foreseeable future.