2011 Audi Q5 2.5L Diesel · LD11 ULG

The vehicle most recently passed its MOT on 17 August 2026 with no defects recorded. Looking at the broader history, the maintenance trend is exceptionally stable, with a consistent string of clean passes dating back to 2019. The absence of recurring failures or advisories over the last seven years indicates a vehicle that has likely been maintained to a high standard or has had significant preventative work carried out to avoid test failures. With a recorded mileage of 179,433 miles over approximately 15 years, the vehicle has averaged roughly 11,962 miles per year. This usage rate is typical for its age and suggests the car has been used as a regular driver rather than suffering from the degradation associated with long periods of standing. While this consistent usage is generally positive for engine lubrication and seal integrity, the high total mileage implies that many original components are nearing the end of their natural service life. Given the clean MOT record, a prospective buyer should focus on physical inspections that exceed the basic scope of a roadworthiness test. At this mileage, it is critical to verify the service history regarding the timing belt and water pump, as these are high-priority items for a vehicle of this age. You should also examine the suspension bushes and coil springs for signs of fatigue or splitting, as high-mileage SUVs often exhibit wear in these areas which may not yet be severe enough to trigger an MOT failure but will impact ride quality and tyre wear. During a test drive, listen for any suspension clunks or knocks over uneven surfaces and feel for any shuddering under braking, which could indicate warped brake discs or binding calipers. Check the tyre sidewalls for fine cracking or perishing, as older rubber can lose grip regardless of remaining tread depth. Finally, inspect the engine bay for any signs of oil seepage and verify the condition of the 12V battery, as high-mileage vehicles often require updated electrical components to maintain reliability.