2021 Fiat 500 Lounge Mhev 1.0L Petrol · LL21 YVM

A consistent pattern of clear test outcomes defines the roadworthiness record of this Fiat 500, marked by three consecutive annual test passes with zero failures recorded across its statutory testing life. The vehicle successfully maintained this unblemished streak during its most recent inspection on 25th August 2026, which recorded a clean pass with no defects or advisories noted. This latest result represents an improving trajectory over previous years, successfully clearing the minor recurring edge wear items that had been flagged on the front and rear tyres during earlier inspections in 2024 and 2025. Accumulating 48,153 miles over its five-year lifespan translates to an average of roughly 9,600 miles per year, placing the vehicle squarely within typical UK usage parameters for its age. This steady and balanced accumulation rate indicates that the car has experienced continuous, regular use rather than enduring intense fleet mileage or sitting idle for extended periods. Mechanically, this consistent usage profile means the mild-hybrid powertrain, ancillaries, and electrical systems have been exercised regularly, reducing the risk of static degradation such as seized actuators or battery sulfation that often affects low-mileage examples left standing. Despite the clean bill of health on the latest certificate, prospective buyers must pay close attention to the past tyre advisories, specifically checking the current tread depth, inner-edge wear patterns, and brand matching across all four corners. Because front inner-edge wear was previously flagged twice in consecutive years, inspect the front suspension geometry and track rod ends for any play or misalignment that could accelerate wear or cause tracking issues. During the test drive, listen carefully for any structural knocks or clunks from the front MacPherson struts and rear torsion beam over potholes or uneven road surfaces, and ensure the steering tracks straight without pulling under braking. As part of a thorough physical pre-purchase inspection, safely examine the underbody structure, exhaust hangers, and exposed brake lines for surface corrosion, paying particular attention to areas prone to road salt accumulation. Verify the operation of the mild-hybrid system by monitoring the dashboard for any charging faults or stop-start system irregularities during a varied urban and extra-urban drive. Finally, check that all dashboard warning lights illuminate correctly at ignition and extinguish promptly upon starting, confirming that the electronic control units register no hidden faults stored in the memory.